OK, I honestly don't know then. Maybe the third chip might do it, but I really don't know. Here's the pinout for that: http://www.datasheetbank.com/4558D-Datasheet-PDF-JRC

Also, you might want to try to run it with 5V without any modding first.

It should be pretty much same as the other screens. Does any of the 2 chips have XL1509 on them?

https://k1agpw.bn1303.livefilestore.com/y3mEHWhyJUbriDFSNO4NpJGx15TY7GbOKjculU89o-3UFTWd5T7r33v8CvFvBinBO17WqfjDWynYx1TTV922OWFgXf8mYuQ8oASdexQWkuf47WzKeh4Z8fSh_soJ5Yvk0cIuG4xVHJpiTFKBLStBwi12NDgT_wEnqNkLnumXIoECoI?width=2533&height=2906&cropmode=none The black/ground wire can go to the pin next to...

So did you do the 5V jumper or not?

I took mine off, based on some guide, but some people left them in there, so I think it makes no difference. Especially if the picture is good, as you said. :) so to get this right.... you have the chipped removed and jumper cable to pin 2 if so... it will be interesting to see how it performs with...

I took mine off, based on some guide, but some people left them in there, so I think it makes no difference. Especially if the picture is good, as you said.

And yes, the ground wire is good

Ok, here's the chip diagram: http://www.sudomod.com/forum/download/file.php?id=3364 I don't have this screen, so I can't guarantee how it should be, but I think it should be pin2. But you're getting some picture, it could also be poorly attached ribbon cable between the board and the screen. They're...

The second picture shows the red wire going to pin3, not pin2 (even though it's correct in your first picture)

edit: Also you ground wire is going to a wrong spot on the Pi, I think.

So I received the LCD today, pleasantly surprised with the size of the board! Haven't done the 5V mod yet, but the same 1509 chip is there! :) Came in a different box, but it's seems great. Hope it works, will try it tomorrow :) https://k1ahpw.bn1303.livefilestore.com/y3mezyXmdimcXDdoVTOUPAXq3_hQQeR...