New project from DaftMike - a SNESpi. Actually, two SNESpi's, covering both console designs. Plus controllers. Plus Super Game Boys. Including functional cartridge readers, switches, eject buttons and cartridge flaps.
http://www.daftmike.com/2017/09/snespi.html
It's... impressive.
DaftMike's SNESpi
-
- Posts: 392
- Joined: Thu Jun 09, 2016 4:17 am
- Location: uk
- Has thanked: 76 times
- Been thanked: 51 times
Re: DaftMike's SNESpi
That is a nice build, the 3d prints are so good, the scale is really good, it is better then an official mini
Check out my modding and repair channel of retro and modern consoles:
https://www.youtube.com/channel/UCFz7yW ... GtQ/videos
https://www.youtube.com/channel/UCFz7yW ... GtQ/videos
- Helder
- Trailblazer
- Posts: 2985
- Joined: Thu May 05, 2016 8:33 am
- Location: Rogers, AR
- Has thanked: 1459 times
- Been thanked: 3114 times
Re: DaftMike's SNESpi
Hopefully he doesn't cop out like he did halfway through the NES version with his kits.
Chat with me and other members On Discord
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Re: DaftMike's SNESpi
True. Though apparently he's not going to do a kit for this one, because the NESpi was such a mess. Besides, apart from the case (and apparently he's releasing the files for them), the only 'special' component in his build is the vertical RFID antenna, and I suspect that won't be too hard to overcome.
I wonder if you'd be able to use something like this: https://www.adafruit.com/product/2460 with something like this: http://www.elechouse.com/elechouse/inde ... ts_id=2269 for an antenna solution.
I wonder if you'd be able to use something like this: https://www.adafruit.com/product/2460 with something like this: http://www.elechouse.com/elechouse/inde ... ts_id=2269 for an antenna solution.
Who is online
Users browsing this forum: Bing [Bot] and 1 guest