need help finding a similar analogue stick

Got an idea for a project? Found a cool project you want to share? Post it here!
Post Reply
Lpoolm
Posts: 392
Joined: Thu Jun 09, 2016 4:17 am
Location: uk
Has thanked: 76 times
Been thanked: 51 times

need help finding a similar analogue stick

Post by Lpoolm » Mon Nov 20, 2017 1:12 pm

so i am still building my "lovely" Lameboy 1up and the analogue stick i have soldered to it only seems to work up/down, it will not do anything left or right. i am assuming it is faulty as my speaker was.
my problem is i can not find anything like it so need some help trying to source one. The 1up aio board has u/d/l/r pads so i really need an analogue stick withthe same outputs, even if its laid out different i could wire them to the pads thats why i dont think psp/3ds sticks will work due to the outputs.
i have attached photos for you to see, hopefully someone can help
20171120_200014.jpg
20171120_200014.jpg (3.7 MiB) Viewed 4010 times
Check out my modding and repair channel of retro and modern consoles:
https://www.youtube.com/channel/UCFz7yW ... GtQ/videos

User avatar
VeteranGamer
Posts: 1738
Joined: Thu Jan 26, 2017 11:12 am
Location: London, UK
Has thanked: 528 times
Been thanked: 909 times

Re: need help finding a similar analogue stick

Post by VeteranGamer » Mon Mar 26, 2018 2:30 am

Lpoolm wrote:
Mon Nov 20, 2017 1:12 pm
so i am still building my "lovely" Lameboy 1up and the analogue stick i have soldered to it only seems to work up/down, it will not do anything left or right. i am assuming it is faulty as my speaker was.
my problem is i can not find anything like it so need some help trying to source one. The 1up aio board has u/d/l/r pads so i really need an analogue stick withthe same outputs, even if its laid out different i could wire them to the pads thats why i dont think psp/3ds sticks will work due to the outputs.
i have attached photos for you to see, hopefully someone can help
20171120_200014.jpg

i'm in the process of building one of these for someone......

did you have any success in sourcing these?



.

Lpoolm
Posts: 392
Joined: Thu Jun 09, 2016 4:17 am
Location: uk
Has thanked: 76 times
Been thanked: 51 times

Re: need help finding a similar analogue stick

Post by Lpoolm » Mon Mar 26, 2018 3:36 am

VeteranGamer wrote:
Mon Mar 26, 2018 2:30 am
Lpoolm wrote:
Mon Nov 20, 2017 1:12 pm
so i am still building my "lovely" Lameboy 1up and the analogue stick i have soldered to it only seems to work up/down, it will not do anything left or right. i am assuming it is faulty as my speaker was.
my problem is i can not find anything like it so need some help trying to source one. The 1up aio board has u/d/l/r pads so i really need an analogue stick withthe same outputs, even if its laid out different i could wire them to the pads thats why i dont think psp/3ds sticks will work due to the outputs.
i have attached photos for you to see, hopefully someone can help
20171120_200014.jpg

i'm in the process of building one of these for someone......

did you have any success in sourcing these?


.
no sorry, I got more feedback from the retopie handhelds group on facebook but couldnt source one! The links I were given none seemed to be even close and all were on chinese websites! luckily for me the one I had was not faulty just one of the solder legs had come off?
It was a horrible build, I am glad to get shut! I hope you enjoy it more then I did!!
Check out my modding and repair channel of retro and modern consoles:
https://www.youtube.com/channel/UCFz7yW ... GtQ/videos

User avatar
VeteranGamer
Posts: 1738
Joined: Thu Jan 26, 2017 11:12 am
Location: London, UK
Has thanked: 528 times
Been thanked: 909 times

Re: need help finding a similar analogue stick

Post by VeteranGamer » Mon Mar 26, 2018 12:22 pm

Lpoolm wrote:
Mon Mar 26, 2018 3:36 am

no sorry, I got more feedback from the retopie handhelds group on facebook but couldnt source one! The links I were given none seemed to be even close and all were on chinese websites! luckily for me the one I had was not faulty just one of the solder legs had come off?
It was a horrible build, I am glad to get shut! I hope you enjoy it more then I did!!
thanks.... no probs.....

the stick that came with the kit im building works perfectly.....

but i actually like this stick, especially how it work (its not digital inputs, but works pretty decently)

i just wanted to use it in another build, as i can run it off the GPIO


i'm searching, it has to be out there.....


.

User avatar
kite
Posts: 972
Joined: Thu May 12, 2016 4:30 am
Location: UK
Has thanked: 246 times
Been thanked: 361 times
Contact:

Re: need help finding a similar analogue stick

Post by kite » Tue Mar 27, 2018 2:50 am

https://www.aliexpress.com/item/2-Axis- ... 90007.html

You can find by searching "2-Axis Thumb", haven't seen one without the PCB attached, although I do have a handfull of them.. ask the seller directly, I don't like the fact that the cap is able to 'rotate' freely
Stock clearance - CLOSED: viewtopic.php?f=38&t=12064
Kite's Mailing List: https://goo.gl/forms/e97uUvPOfUxPWdz82
Kite's FAQ: https://kiteretro.com/faq/


ImageImageImageImageImage

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest