Hi, since I broke my LCD controller doing the 5v conversion (variant 7), I was wondering if it'd be safe to user a step up module so I don't have to risk breaking another LCD controller with my newbie skills.
My step up module is this one,
Would it still work?
Sorry if it is an obvious question.
Thanks in advice.
Pat.
Safety of steping up to 12v
- correia5022
- Posts: 202
- Joined: Mon Dec 05, 2016 12:32 am
- Location: Portugal
- Has thanked: 17 times
- Been thanked: 38 times
Re: Safety of steping up to 12v
That's a good question, i have been wandering that also... I think it can be made.
Probably this will consume more power from the battery tho...
Probably this will consume more power from the battery tho...
________________________________________
Starting on electronics
My first build, 2 years later
https://sudomod.com/forum/viewtopic.php ... 8&start=30
Check out my Boombox: https://nrcboombox.wixsite.com/website
Starting on electronics
My first build, 2 years later
https://sudomod.com/forum/viewtopic.php ... 8&start=30
Check out my Boombox: https://nrcboombox.wixsite.com/website
Re: Safety of steping up to 12v
A little late.
i found that very tiny step up module
https://www.pololu.com/product/2117
I'll try it today and report if it works well or not.
It's a loss of 10%, but 10% just for the screen is acceptable to me (better than burning a driver board once again)
i found that very tiny step up module
https://www.pololu.com/product/2117
I'll try it today and report if it works well or not.
It's a loss of 10%, but 10% just for the screen is acceptable to me (better than burning a driver board once again)
Who is online
Users browsing this forum: No registered users and 1 guest