Tiny Pi Clone updated version

Want to show off your own project? Want to keep a build log of it? Post it here!
Post Reply
doro44
Posts: 27
Joined: Mon Aug 21, 2017 11:55 am
Has thanked: 2 times
Been thanked: 6 times

Tiny Pi Clone updated version

Post by doro44 » Tue Jan 15, 2019 3:29 pm

Hi guys, I just wanted to share my latest version of the tiny pi clone this time GBA vesion orientation:
SpoilerShow
20190115_231331.png
20190115_231331.png (435.5 KiB) Viewed 7109 times
20190115_231342.png
20190115_231342.png (454.75 KiB) Viewed 7109 times
I need to redesign the board a bit to be able to fit into some nice enclosure. Also, anyone knows about some good 320*240 1.8 - 2.2" screen that works well with RPI zero? This one is just the low res 160*128 pixels...

Any questions, just ask...
Top
User avatar
moosepr
Posts: 524
Joined: Wed Jan 25, 2017 6:18 am
Has thanked: 69 times
Been thanked: 241 times
Contact:
Contact moosepr

Re: Tiny Pi Clone updated version

Post by moosepr » Wed Jan 16, 2019 7:51 am

looks good!!

They make ili9341 screens in a 2.2" size. They are 240x320 :)
Get a small cheep LCD in your project https://www.sudomod.com/forum/viewtopic.php?f=22&t=2312
Wrap it all round a battery https://www.sudomod.com/forum/viewtopic.php?f=13&t=2292
Or use a custom PCB to make it really small https://www.sudomod.com/forum/viewtopic.php?f=13&t=2512
or make it really really really really tiny!! https://www.sudomod.com/forum/viewtopic.php?f=13&t=2919
Top
Gizard
Posts: 78
Joined: Sat Feb 03, 2018 8:37 am
Has thanked: 6 times
Been thanked: 8 times

Re: Tiny Pi Clone updated version

Post by Gizard » Wed Jan 16, 2019 9:15 pm

That looks amazing!
You should sell the PCBs, maybe even a kit. I love the new orientation and would buy in a heartbeat.
Check out my bluetooth speaker in an altoids tin! https://sudomod.com/forum/viewtopic.php?t=7274
Top
doro44
Posts: 27
Joined: Mon Aug 21, 2017 11:55 am
Has thanked: 2 times
Been thanked: 6 times

Re: Tiny Pi Clone updated version

Post by doro44 » Thu Jan 17, 2019 10:42 am

I have few boards, but I would rather not sell this version as kit as the board has two issues:

1. orientation of RPi is not ideal - the sd card is little difficult to install remove (but can be done without big problems)
2. the middle bottom jog dial has only two directions working

If this does not discourages you I can send you a kit that is very simple to assembly.
Top
Gizard
Posts: 78
Joined: Sat Feb 03, 2018 8:37 am
Has thanked: 6 times
Been thanked: 8 times

Re: Tiny Pi Clone updated version

Post by Gizard » Thu Jan 17, 2019 2:47 pm

Please PM me when you resolve those problems, and I'll buy a kit from you
Check out my bluetooth speaker in an altoids tin! https://sudomod.com/forum/viewtopic.php?t=7274
Top
doro44
Posts: 27
Joined: Mon Aug 21, 2017 11:55 am
Has thanked: 2 times
Been thanked: 6 times

Re: Tiny Pi Clone updated version

Post by doro44 » Thu Jan 17, 2019 2:57 pm

Sure, I ll publish next version here again :)
Top
doro44
Posts: 27
Joined: Mon Aug 21, 2017 11:55 am
Has thanked: 2 times
Been thanked: 6 times

Re: Tiny Pi Clone updated version

Post by doro44 » Mon Apr 29, 2019 9:28 am

hi all, I had finally some time to complete the latest version of the tiny pi clone, now its up and running. Instead of soldering the pi to the board I decided to use the pogo pins. Still, for the final version I ll be soldering the pi to the board.
here are few pictures:
SpoilerShow
20190429_164720.jpg
20190429_164720.jpg (242 KiB) Viewed 6610 times
SpoilerShow
20190429_164711.jpg
20190429_164711.jpg (241.95 KiB) Viewed 6610 times
SpoilerShow
20190429_164701.jpg
20190429_164701.jpg (206.74 KiB) Viewed 6610 times
SpoilerShow
20190429_164643.jpg
20190429_164643.jpg (189.59 KiB) Viewed 6610 times
SpoilerShow
20190429_164552.jpg
20190429_164552.jpg (198.1 KiB) Viewed 6610 times
SpoilerShow
20190429_164447.jpg
20190429_164447.jpg (179.04 KiB) Viewed 6610 times
Top
Post Reply

Return to “Show-off Corner”

Who is online

Users browsing this forum: No registered users and 1 guest