Wii U - Raspberry - WiP
Re: Wii U - Raspberry - WiP
I made an assembly of different parts.
I am based on this topics :
- viewtopic.php?f=20&t=2285&p=23956#p23956 for the Teensy 2.0 final script of @ZarkWizard
- viewtopic.php?f=13&t=1607 with the diagram of @banjokazooie
I mix all, i read the script and i made this...
If you see errors, say it, i would correct. If you have suggestions, do not be shy
I am based on this topics :
- viewtopic.php?f=20&t=2285&p=23956#p23956 for the Teensy 2.0 final script of @ZarkWizard
- viewtopic.php?f=13&t=1607 with the diagram of @banjokazooie
I mix all, i read the script and i made this...
If you see errors, say it, i would correct. If you have suggestions, do not be shy
- YaYa
- Posts: 1719
- Joined: Mon Jun 26, 2017 12:42 pm
- Location: brittany - France
- Has thanked: 871 times
- Been thanked: 689 times
- Contact:
Re: Wii U - Raspberry - WiP
Hehe, j'en étais sûr. Tu écris l'anglais comme du français dans les tournures de phrases, c'est ca qui t'as démasqué
- YaYa
- Posts: 1719
- Joined: Mon Jun 26, 2017 12:42 pm
- Location: brittany - France
- Has thanked: 871 times
- Been thanked: 689 times
- Contact:
Re: Wii U - Raspberry - WiP
Hello all.
I received simple part but very important : 3D print for my battery.
Very very (terribly !!!!!) complicated to found the good place. I cut small part, but it's work. Everything is in its place.
Now, the more complicated is past, I will be able to start solder the elements of the controls on the teensy.
I advance, I advance ... it's hard.
I received simple part but very important : 3D print for my battery.
Very very (terribly !!!!!) complicated to found the good place. I cut small part, but it's work. Everything is in its place.
Now, the more complicated is past, I will be able to start solder the elements of the controls on the teensy.
I advance, I advance ... it's hard.
- YaYa
- Posts: 1719
- Joined: Mon Jun 26, 2017 12:42 pm
- Location: brittany - France
- Has thanked: 871 times
- Been thanked: 689 times
- Contact:
Re: Wii U - Raspberry - WiP
Are they 18650 batteries ?
You have Simon Design on 3DHubs. They make great printing, very cheap, and they are located in Bordeaux
You have Simon Design on 3DHubs. They make great printing, very cheap, and they are located in Bordeaux
Who is online
Users browsing this forum: No registered users and 1 guest