How to Program Helder's All in One GBZ PCB with Arduino IDE
- Helder
- Trailblazer
- Posts: 2985
- Joined: Thu May 05, 2016 8:33 am
- Location: Rogers, AR
- Has thanked: 1459 times
- Been thanked: 3114 times
Re: How to Program Helder's All in One GBZ PCB with Arduino IDE
Use the code I added in his guide as some of the buttons on his code were not used in my code so a few buttons are not wired in code.
Chat with me and other members On Discord
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
- GameBoyMaster
- Posts: 31
- Joined: Fri Mar 03, 2017 7:09 pm
- Has thanked: 3 times
- Been thanked: 2 times
Re: How to Program Helder's All in One GBZ PCB with Arduino IDE
Hey, Is there a way that I could do this without the the pin header, because I'm not clear on how I'd do it otherwise
My Game Boy Zero:
https://sudomod.com/forum/viewtopic.php?f=43&t=5033
https://sudomod.com/forum/viewtopic.php?f=43&t=5033
- Helder
- Trailblazer
- Posts: 2985
- Joined: Thu May 05, 2016 8:33 am
- Location: Rogers, AR
- Has thanked: 1459 times
- Been thanked: 3114 times
Re: How to Program Helder's All in One GBZ PCB with Arduino IDE
You just need to solder a usb wire like I already told you in the other thread then use a wire to touch the reset pin on the 6pin header holes to a GND to initiate a reset.
Chat with me and other members On Discord
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
- GameBoyMaster
- Posts: 31
- Joined: Fri Mar 03, 2017 7:09 pm
- Has thanked: 3 times
- Been thanked: 2 times
Re: How to Program Helder's All in One GBZ PCB with Arduino IDE
Oh ok so the pin header just makes it easier
My Game Boy Zero:
https://sudomod.com/forum/viewtopic.php?f=43&t=5033
https://sudomod.com/forum/viewtopic.php?f=43&t=5033
Re: How to Program Helder's All in One GBZ PCB with Arduino IDE
I'm having trouble installing the sparkfun driver. My computer recognizes that its plugged in but doesn't show it as a controller. I updated the drivers and directed it to the files given but it says everything is up to date but still doesn't show the sparkfun pro micro. Should I just continue to the next step or am I missing something?
- Helder
- Trailblazer
- Posts: 2985
- Joined: Thu May 05, 2016 8:33 am
- Location: Rogers, AR
- Has thanked: 1459 times
- Been thanked: 3114 times
Re: How to Program Helder's All in One GBZ PCB with Arduino IDE
If you're using my board then unless it's one of very older black boards there is no more sparkfun driver/bootloader used so you should choose the 5v Leonardo as your board.
Chat with me and other members On Discord
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Re: How to Program Helder's All in One GBZ PCB with Arduino IDE
Helder! The pics in this are not showed up. I want to programme my AIO board. Please help~
Re: How to Program Helder's All in One GBZ PCB with Arduino IDE
Hello everybody, I have exactly the same problem. Was this a solution found? Thanks and best regardsSwingeyP wrote: ↑Sat Aug 13, 2016 9:09 amHello @Helder,
Ok.
I reconnected the USB lead as I had originally and hooked it up to my Win10 PC.
All I see is the USB Not recognised error message popup and the device shown as :
'Unknown USB Device (Port Reset Failed)' in the Universal Serial Bus Controllers list.
I have tried swapping the white and green wires but when I do this nothing is detected at all (makes sense)
So, nothing detected by the Win10 PC.
IMG_3405.JPG
Re: How to Program Helder's All in One GBZ PCB with Arduino IDE
hey, can nobody help me?Macx wrote: ↑Sat Dec 22, 2018 2:13 amHello everybody, I have exactly the same problem. Was this a solution found? Thanks and best regardsSwingeyP wrote: ↑Sat Aug 13, 2016 9:09 amHello @Helder,
Ok.
I reconnected the USB lead as I had originally and hooked it up to my Win10 PC.
All I see is the USB Not recognised error message popup and the device shown as :
'Unknown USB Device (Port Reset Failed)' in the Universal Serial Bus Controllers list.
I have tried swapping the white and green wires but when I do this nothing is detected at all (makes sense)
So, nothing detected by the Win10 PC.
IMG_3405.JPG
- VeteranGamer
- Posts: 1738
- Joined: Thu Jan 26, 2017 11:12 am
- Location: London, UK
- Has thanked: 528 times
- Been thanked: 909 times
Re: How to Program Helder's All in One GBZ PCB with Arduino IDE
Macx wrote: ↑Sun Dec 23, 2018 12:57 amhey, can nobody help me?Macx wrote: ↑Sat Dec 22, 2018 2:13 amHello everybody, I have exactly the same problem. Was this a solution found? Thanks and best regardsSwingeyP wrote: ↑Sat Aug 13, 2016 9:09 amHello @Helder,
Ok.
I reconnected the USB lead as I had originally and hooked it up to my Win10 PC.
All I see is the USB Not recognised error message popup and the device shown as :
'Unknown USB Device (Port Reset Failed)' in the Universal Serial Bus Controllers list.
I have tried swapping the white and green wires but when I do this nothing is detected at all (makes sense)
So, nothing detected by the Win10 PC.
IMG_3405.JPG
have you had a look here....
https://sudomod.com/forum/viewtopic.php?f=52&t=1185
there's a high chance this has been covered and hopefully resolved there.....
.
Who is online
Users browsing this forum: No registered users and 1 guest