I've almost finished my build but for some reason the screen is not working anymore, when you look from a normal angle it seems to be just a white screen
SpoilerShow
SpoilerShow
SpoilerShow
Any help or opinions are appreciated.
Thank you
I have a variant 8 too and i dont need the both wires connected, i have just the yellow one connected and works just fine.
After your post i tried just the yellow and you're right it does work with just one, i just had the white connected correctly and the yellow connected wrong so i was on av2 instead of av1. I've connected just the yellow and on av1 am getting exactly the same issue.TheDeviantZen wrote: ↑Sat May 20, 2017 5:25 amI have a variant 8 too and i dont need the both wires connected, i have just the yellow one connected and works just fine.
Have tried pushing it in to make sure it's connected right, even took it out and reconnected it to be 100% it's pushed all the way, can't see any cuts or damage to it and can't figure out what's wrong with it.TheDeviantZen wrote: ↑Sat May 20, 2017 5:25 amSeems to me that you have some sort of problem with the flat cable of your screen. Try to move the flat cable and see if it does any difference.
Users browsing this forum: No registered users and 1 guest