Page 1 of 1
Gameboy Button dimensions?
Posted: Mon Sep 04, 2017 7:53 pm
by fsatatkid
Hey guys; just trying to verify some info. I'm looking for the exact diameter of the DMG 01 A and B buttons. I've searched over this forum and found some conflicting information; from 10.05 mm to 10.5mm to 10.8mm.
Just trying to figure out exactly how big I need to make my holes to add my X and Y buttons.
Re: Gameboy Button dimensions?
Posted: Tue Sep 05, 2017 1:18 pm
by Fredl
I only have a ruler at hand, so I cant measure .1mms, sorry. However, the holes need to be slightly larger anyways, and I think most people go with 11mm holes and it works out just fine! Are you using a Dremel or a Drill?
Re: Gameboy Button dimensions?
Posted: Tue Sep 05, 2017 2:30 pm
by VeteranGamer
fsatatkid wrote: ↑Mon Sep 04, 2017 7:53 pm
Hey guys; just trying to verify some info. I'm looking for the exact diameter of the DMG 01 A and B buttons. I've searched over this forum and found some conflicting information; from 10.05 mm to 10.5mm to 10.8mm.
Just trying to figure out exactly how big I need to make my holes to add my X and Y buttons.
get one of these....
https://www.aliexpress.com/item/Xcan-Ho ... st=ae803_1
drill up to 10 (10mm) and you should be fine......
Re: Gameboy Button dimensions?
Posted: Tue Sep 05, 2017 3:17 pm
by 144TECH
fsatatkid wrote: ↑Mon Sep 04, 2017 7:53 pm
Hey guys; just trying to verify some info. I'm looking for the exact diameter of the DMG 01 A and B buttons. I've searched over this forum and found some conflicting information; from 10.05 mm to 10.5mm to 10.8mm.
Just trying to figure out exactly how big I need to make my holes to add my X and Y buttons.
10.8mm , 11mm drill , play= 0.1 around the hole (measured digital)
Re: Gameboy Button dimensions?
Posted: Tue Sep 05, 2017 7:24 pm
by fsatatkid
That's actually the exact one I have! I was just trying to make sure if I went 11mm it would do the trick.