Page 5 of 5

Re: ili9341 SPI TFT Screen Connectors (for bare screens without boards)

Posted: Thu Nov 29, 2018 2:16 am
by ChadWinkler
Greetings veteran gamer,

I was wondering if there is a 5 inch 960 x 544 display that could use these connectors? I'm not sure on how to design my own connectors but I like the ones posted. It uses minimal gpio pins and that's what I'm looking for. On that note would the gpio pin usage increase if the screen had touch involved(silly question that I already know the answer to)?

Re: ili9341 SPI TFT Screen Connectors (for bare screens without boards)

Posted: Thu Nov 29, 2018 7:33 am
by VeteranGamer
ChadWinkler wrote:
Thu Nov 29, 2018 2:16 am
Greetings veteran gamer,

I was wondering if there is a 5 inch 960 x 544 display that could use these connectors? I'm not sure on how to design my own connectors but I like the ones posted. It uses minimal gpio pins and that's what I'm looking for. On that note would the gpio pin usage increase if the screen had touch involved(silly question that I already know the answer to)?

this is all dependent on the screen....

these connectors work with screens that can be enabled via SPI.....

i'm not sure of which 5" LCD that can do this (if any)
I would look for a screen that suits your project, and then have a look at which ways you can connect that screen
(a decent seller should be able to provide a datasheet)

you may be looking at a DPI rather than a SPI (DPI will require a lot more GPIO connections)


.

Re: ili9341 SPI TFT Screen Connectors (for bare screens without boards)

Posted: Tue Feb 09, 2021 5:43 am
by sainivedant41
I see 8 connections on the board but Moosepr's guide shows there are 9. Specifically, how is the connection for BL to pin12 accounted for?

Re: ili9341 SPI TFT Screen Connectors (for bare screens without boards)

Posted: Fri Feb 12, 2021 6:33 pm
by Dividion
Wow. Are you Broomhill? That EXACT same question was asked (and answered) on page 2, years ago.
sainivedant41 wrote:
Tue Feb 09, 2021 5:43 am
I see 8 connections on the board but Moosepr's guide shows there are 9. Specifically, how is the connection for BL to pin12 accounted for?
Broomhill wrote:
Sun Jul 15, 2018 8:33 am
I'm a bit confused, I see 8 connections on the board but Moosepr's guide shows there are 9. Specifically, how is the connection for BL to pin12 accounted for?

Re: ili9341 SPI TFT Screen Connectors (for bare screens without boards)

Posted: Fri Oct 01, 2021 5:42 pm
by Broomhill
Wow...definitely wasn't me. I haven't visited in a looong time. Hard to believe its been that long since I found this place and I still haven't put that thing together. :D