Here's a very simple tactile button shim for you to use. You'll still need to apply a small layer of glue to stabilize the button and attach the shim to the button using a piece of VHB tape. The button shim is just thick enough so you can use the battery as a brace so your presses wont dislodge the button too much.
Link to the STL: https://drive.google.com/file/d/17ddN7E ... sp=sharing
- 20171210_151405.jpg (3.01 MiB) Viewed 2407 times
- 20171210_152301.jpg (3.58 MiB) Viewed 2407 times