Shoot me a pm if you need help with printing parts. I have 3 printers as well and since the stupid spinner phase is over they aren't doing much lol.wermy wrote: ↑Thu Jun 15, 2017 6:48 pmTrust me, I want to get it all finished and out there asap.TechnoThePiGuy wrote: ↑Thu Jun 15, 2017 6:32 pmWermy, How much longer until a guide? I want to build this SOOOOO much
What I'm waiting on currently:We'll keep everyone updated, I promise.
- Screws to arrive from china
- Finishing printing pre-orders (I've got 3 printers going 24/7 for these - even running home during my lunch break to switch prints out when I can)
- Final, non-prototype parts from Helder to do the guide with
mintyPi 2.0 News & Updates
- SumCanadianGuy
- Posts: 107
- Joined: Mon Oct 03, 2016 11:37 am
- Has thanked: 51 times
- Been thanked: 19 times
Re: mintyPi 2.0 News & Updates
-
- Posts: 1
- Joined: Fri Jun 23, 2017 12:35 pm
- Has thanked: 1 time
Re: mintyPi 2.0 News & Updates
Hi Wermy!! I am a really big fan of 3d printing and rasberry pi. I wanted to know the part total minus the rasberry pi, 3d prints, ds lite buttons, and the charger and battery. Thanks.
- wermy
- Site Admin
- Posts: 1346
- Joined: Tue May 03, 2016 8:51 pm
- Has thanked: 620 times
- Been thanked: 1322 times
- Contact:
Re: mintyPi 2.0 News & Updates
Added a small update.
Part list is up on the wiki (sudomod.com/wiki) - the total depends where you live and where you buy things.AndriodFan wrote: ↑Fri Jun 23, 2017 12:39 pmHi Wermy!! I am a really big fan of 3d printing and rasberry pi. I wanted to know the part total minus the rasberry pi, 3d prints, ds lite buttons, and the charger and battery. Thanks.
Re: mintyPi 2.0 News & Updates
I'm new to this whole world of modding but this forum is outstanding and this DIY, I'm so excited to start building it. As my first project I don't know what test pads are but I'm really glad that you would build these kits to be more novice-friendly and not so intimidating. Thank you for all your hard work!wermy wrote: ↑Sun Apr 23, 2017 10:02 pm
6-23
...(the final parts are slightly different [they have some test pads that people can use to make sure their soldering is correct, for example]
Parts list, software used and FAQs are here:
http://www.sudomod.com/wiki/index.php?title=MintyPi
- Helder
- Trailblazer
- Posts: 2985
- Joined: Thu May 05, 2016 8:33 am
- Location: Rogers, AR
- Has thanked: 1459 times
- Been thanked: 3114 times
Re: mintyPi 2.0 News & Updates
Added the images of the final PCBs I got from the manufacturer to Wermy's first post, late next week they should be here.
Chat with me and other members On Discord
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Re: mintyPi 2.0 News & Updates
What happened to this board?
- Attachments
-
- Screen Shot 2017-06-26 at 10.08.08 AM.png (95.58 KiB) Viewed 7546 times
- rodocop
- Posts: 1723
- Joined: Mon Aug 22, 2016 3:14 pm
- Location: Saskatchewan
- Has thanked: 606 times
- Been thanked: 608 times
Re: mintyPi 2.0 News & Updates
I also have a 2.2" screen and may be interested in one of those small boards with the button PCB.
_____________________________________________________
My Minty Pi builds:
http://www.sudomod.com/forum/viewtopic.php?f=32&t=3628
My GBZ builds:
http://www.sudomod.com/forum/viewtopic. ... 813#p50813
My modded DMG-01's:
http://www.sudomod.com/forum/viewtopic.php?f=13&t=2696
My NESpi:
http://www.sudomod.com/forum/viewtopic.php?f=13&t=2941
My Gaboze Pocaio's
https://sudomod.com/forum/viewtopic.php?f=13&t=6063
My Minty Pi builds:
http://www.sudomod.com/forum/viewtopic.php?f=32&t=3628
My GBZ builds:
http://www.sudomod.com/forum/viewtopic. ... 813#p50813
My modded DMG-01's:
http://www.sudomod.com/forum/viewtopic.php?f=13&t=2696
My NESpi:
http://www.sudomod.com/forum/viewtopic.php?f=13&t=2941
My Gaboze Pocaio's
https://sudomod.com/forum/viewtopic.php?f=13&t=6063
- Helder
- Trailblazer
- Posts: 2985
- Joined: Thu May 05, 2016 8:33 am
- Location: Rogers, AR
- Has thanked: 1459 times
- Been thanked: 3114 times
Re: mintyPi 2.0 News & Updates
I have a few left but the ribbon is a bit shorter than what is required to reach the controller board and the demand isn't really there since the controller boards also have the solder points on them for a wire install for for these screens.
Chat with me and other members On Discord
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Re: mintyPi 2.0 News & Updates
- Attachments
-
- Screen Shot 2017-06-26 at 2.01.54 PM.png (281.19 KiB) Viewed 7494 times
- Helder
- Trailblazer
- Posts: 2985
- Joined: Thu May 05, 2016 8:33 am
- Location: Rogers, AR
- Has thanked: 1459 times
- Been thanked: 3114 times
Re: mintyPi 2.0 News & Updates
You both can have one of the boards but you will need to procure your own ribbons which are the reverse kind, so one side has the pins up while the other has the blue backing with the length of 120mm. Send me a PM if you want one of these boards.
Chat with me and other members On Discord
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Who is online
Users browsing this forum: No registered users and 1 guest