Hey glad they got there. Were you using the buttons I supplied or from somewhere else? I did find that there was an annoying amount of variation in button diameter depending on who made the buttons. The parts are sort of tuned to the buttons I bought from a distributor, so if they are too tight you may need to expand them a bit. I have used a cone-shaped drill bit like this to do it with great results (gently by hand):Roller Toaster wrote: ↑Fri Jul 07, 2017 2:43 pmMy MintyPi parts arrived today and everything appears functional, however the face buttons are extremely tight. My X is actually stuck and can't be pressed or removed from the case without some force.
mintyPi 2.0 News & Updates
- wermy
- Site Admin
- Posts: 1346
- Joined: Tue May 03, 2016 8:51 pm
- Has thanked: 620 times
- Been thanked: 1322 times
- Contact:
Re: mintyPi 2.0 News & Updates
SpoilerShow
- obsidianspider
- Posts: 98
- Joined: Tue Sep 06, 2016 11:01 am
- Has thanked: 134 times
- Been thanked: 35 times
Re: mintyPi 2.0 News & Updates
I'll be using genuine Nintendo buttons and will report in on how things fit.
- wermy
- Site Admin
- Posts: 1346
- Joined: Tue May 03, 2016 8:51 pm
- Has thanked: 620 times
- Been thanked: 1322 times
- Contact:
Re: mintyPi 2.0 News & Updates
Official ones may be a bit snug, but let me know how it goes! If you have a drill bit like I posted above (which was only a couple bucks, I think), it only takes a minute to remedy it. If I tuned the parts to fit the largest buttons (I tried several different varieties/suppliers) then the smallest ones wound up rattling around. I'm working on putting together a guide this weekend, I'll be going over everything like this to watch out for.obsidianspider wrote: ↑Fri Jul 07, 2017 2:57 pmI'll be using genuine Nintendo buttons and will report in on how things fit.
- Roller Toaster
- Posts: 59
- Joined: Thu Jun 01, 2017 7:15 pm
- Location: McLean, VA
- Has thanked: 45 times
- Been thanked: 20 times
Re: mintyPi 2.0 News & Updates
I got my buttons from an old DS Lite case. What appears to be the problem is a little printing error with one layer of the plastic center square bit sticking out slightly. I'll sand it away and hopefully that'll resolve the problem.
- wermy
- Site Admin
- Posts: 1346
- Joined: Tue May 03, 2016 8:51 pm
- Has thanked: 620 times
- Been thanked: 1322 times
- Contact:
Re: mintyPi 2.0 News & Updates
Ah, yeah 3d printers are great but they are far from perfect. I'll have a video up in the coming days which will show things to watch out for like that.Roller Toaster wrote: ↑Fri Jul 07, 2017 3:02 pmI got my buttons from an old DS Lite case. What appears to be the problem is a little printing error with one layer of the plastic center square bit sticking out slightly. I'll sand it away and hopefully that'll resolve the problem.
-
- Posts: 1
- Joined: Fri Jul 07, 2017 2:59 pm
Re: mintyPi 2.0 News & Updates
When will there be a tutorial I'm very patient and know there's problems but I'm borrowing supplies and need to return it when I'm done Sorry
- Roller Toaster
- Posts: 59
- Joined: Thu Jun 01, 2017 7:15 pm
- Location: McLean, VA
- Has thanked: 45 times
- Been thanked: 20 times
Re: mintyPi 2.0 News & Updates
I managed to find a Dremel bit with the perfect radius so I've been hand cranking that and the button action now feels nice and smooth! I'll be doing the same to the rest of the buttons so that they all feel great. I hope to see a guide for the rest of the build soon! Thanks Wermy!
Re: mintyPi 2.0 News & Updates
Will we be able to run a script on a retropie image that is already loaded with roms? I want to set up a SD care on another pi and then run a script, shutdown the pi and put SD card into minty pi. I did this with a pigrrl 2
The Pi Guy #retromod_customs
- wermy
- Site Admin
- Posts: 1346
- Joined: Tue May 03, 2016 8:51 pm
- Has thanked: 620 times
- Been thanked: 1322 times
- Contact:
Re: mintyPi 2.0 News & Updates
The script is meant for a fresh retropie install, I'm not sure what will happen if you run it on one that is already set up for a pigrrl (I know that also uses an SPI screen, so that's the only real concern).
Re: mintyPi 2.0 News & Updates
I wasn't meaning an image setup up for pigrrl, I meant a fresh retropie image already loaded with roms. Just wanting to know if I can setup on another pi first then shutdown pi and put SD card in mintypi
The Pi Guy #retromod_customs
Who is online
Users browsing this forum: No registered users and 1 guest