GB Null
-
- Posts: 3
- Joined: Fri Nov 02, 2018 3:53 am
Re: GB Null
GBN 1&2 are now alive!
With #2 I desoldered the offending pads, confirmed that the pinout from the RPZ was good (it was) and reattached the switches.
I'm going to do a bit of troubleshooting on #3 with the power info you posted...thanks for that Ultimately if I can at least get the power functional I can determine if the RPZ is still alive.
Do you have a part number for the buttons?
With #2 I desoldered the offending pads, confirmed that the pinout from the RPZ was good (it was) and reattached the switches.
I'm going to do a bit of troubleshooting on #3 with the power info you posted...thanks for that Ultimately if I can at least get the power functional I can determine if the RPZ is still alive.
Do you have a part number for the buttons?
Re: GB Null
How long does the first boot take. I have mine fully assembled, only getting a white screen? The little blue light in the back is flashing like crazy tho. Thanks!
-
- Posts: 3
- Joined: Fri Nov 02, 2018 3:53 am
Re: GB Null
Give it a solid 3-5 minutes to boot the first time, expand and reboot. Is the screen staying white? Mine only stays white for a moment then goes to black until the Gameboy Null logo pops up.
Re: GB Null
Question, in removing the Pi from the GB Null board, i accidentally ripped off the bottom right ground. Is this necessary, and is there an alternative solder point?
Thanks!
Thanks!
Re: GB Null
Here is the spot im referring to https://imgur.com/a/D7hayU6
The pad ripped right off the board, is the board still usable? Is there an alternate point I can use for that ground? Thanks!
Re: GB Null
Should be fine, there are other ground connections on the piXpertXP wrote: ↑Tue Nov 06, 2018 9:42 amHere is the spot im referring to https://imgur.com/a/D7hayU6
The pad ripped right off the board, is the board still usable? Is there an alternate point I can use for that ground? Thanks!
Espresso: viewtopic.php?f=38&t=10154
GB Null: viewtopic.php?f=13&t=5920
Peanut: viewtopic.php?f=13&t=8337
GB Null: viewtopic.php?f=13&t=5920
Peanut: viewtopic.php?f=13&t=8337
Re: GB Null
Hi,
I just put together the game boy null, but when I turn it on with or with out sd card I’m just seeing a blank white screen. Any help or advice would be much appreciated.
Thanks in advance.
I just put together the game boy null, but when I turn it on with or with out sd card I’m just seeing a blank white screen. Any help or advice would be much appreciated.
Thanks in advance.
- YaYa
- Posts: 1719
- Joined: Mon Jun 26, 2017 12:42 pm
- Location: brittany - France
- Has thanked: 871 times
- Been thanked: 689 times
- Contact:
Re: GB Null
You might have an issue with the LCD wiring, check the ribbon cable if there is one or the wires.
-
- Posts: 31
- Joined: Sun Nov 11, 2018 10:42 pm
- Has thanked: 3 times
Who is online
Users browsing this forum: No registered users and 1 guest