Note: I've sold them items. Thank you everyone for your interest!
Hi everyone,
I am selling a lot of brand new GameBoy Zero parts that I recently purchased and never had time to use. Below, you can see a full list separated out by each item (so no 2x or 3x etc. all items are listed that are included), and next to each item you can see the price I paid for them originally (not the asking price - I would like to sell lot - see below).
I would like to sell all of these at the same time as one lot as I do not want to part them out as I am short on time at the moment. Please see asking price below.
Shipping box dimensions and weight if you'd like to calculate shipping: 14 inches x 10 inches x 3 1/2 inches. Weight: 2.73 lbs (43.5 ounces). You can use the origin location of Atlanta, GA United States to get a good idea of what the shipping might be to you.
Note: Prices I paid below include shipping charges I was originally charged (except for some where I didn't look in email for shipping cost and it isn't listed on site... such as Adafruit as it was multi item order). I didn't do the conversion from pounds to USD either so I actually paid a little more for a few items. This is pretty much everything you need to build a couple of GBZ's except maybe the Pi itself!
Items Included plus price I originally paid:
Helder AIO 2.2 PCB - $50.00
PRS-Tech PCB (4-Button) - $9.00
PRS-Tech PCB (4-Button) - $9.00
Amazon 'BW' 3.5 inch TFT LCD Monitor - $17.15
AliExpress 3.5 inch TFT LCD Display (Higher resolution than Amazon - runs off 5v without mod too) - $19.99
PowerBoost 1000c Charger - $19.95
Red Full Housing Case and Button Kit (DMG-01) - $6.68
White Full Housing Case and Button Kit (DMG-01) - $6.68
Gray Full Housing Case and Button Kit (DMG-01) - $6.68
Adafruit Speaker - $1.50
Retrofresh UK GBZ Glass Screen (Black 'Gameboy Zero' border) - $6.00
Retrofresh UK GBZ Glass Screen (Black 'Gameboy Zero' border) - $6.00
Retrofresh UK GBZ Glass Screen (Gray 'Dot Matrix...' border) - $6.00
Retrofresh UK GBZ Glass Screen (Gray 'Dot Matrix...' border) - $6.00
Retrofresh UK Catridge Sticker (Black 'Pi') - $1.00
Retrofresh UK Catridge Sticker (Black 'Pi') - $1.00
Retrofresh UK Catridge Sticker (Green 'PCB') - $1.00
Retrofresh UK Catridge Sticker (Black/White 'Messy NES') - $1.00
Retrofresh UK Catridge Sticker (Black/White 'Messy NES') - $1.00
Retrofresh UK Catridge Sticker (Blue 'RetroPie') - $1.00
Kitsch Bent White 'Half Shell' Cartridge - $3.00
Kitsch Bent White 'Half Shell' Cartridge - $3.00
PRS-Tech uSD Cart Board (Micro SD card to GameBoy slot cart) - $20
PRS-Tech uSD Cart Board (Micro SD card to GameBoy slot cart) - $20
Helder Power strip for GBZ Project - $5.50
Helder Power strip for GBZ Project - $5.50
Sparkfun micro usb breakout - $4.81
3000 mAH lipo battery - $9.80
Button pads (5x D-Pads, 3x dual button pads, and 5x Start/Select pads) - (Approximate) - $2.93 per set so 3 full sets were around: $8.79
Kitsch Bent Custom Buttons (White 'NES Style' includes 2 NES style buttons, D-Pad, Slot insert, and Power switch for DMG-01) - $2.00
Kitsch Bent Custom Buttons (White 'NES Style' includes 2 NES style buttons, D-Pad, Slot insert, and Power switch for DMG-01) - $2.00
Hand Held Legend Button Set (Clear includes full D-Pad, 2 small A/B buttons, and 2 outer buttons) - $2.89
Hand Held Legend Button Set (Black includes full D-Pad, 2 small A/B buttons, and 2 outer buttons) - $2.89
Hand Held Legend Button Set (Green includes full D-Pad, 2 small A/B buttons, and 2 outer buttons) - $2.89
Safe Shutdown (Camble) - $13.28
GameBoy game shells (2 black, 1 white, 1 gray, 1 GameBoy color game) - $9.63
GameBoy slot reader (Came from DS - note condition please - should work fine but no guarantee) - $2.00
GameBoy slot reader (Came from DS - note condition please - should work fine but no guarantee) - $2.00
Female USB ports, Power slide switches, Petentiometers, and Headphone jacks (various sources) - Aproximately $1.00
Miscellaneous Printed Parts (I printed all of these so just listing an approximate value) - $5.00
Total I originally paid: (Appx. - I probably paid a little more than this) $302.61 USD
Asking for all items: $275.00 USD + Actual Shipping based on your location (you pay shipping - all items in one box).
Feel free to PM me offers if you'd like, but since all items are new and unused (except the games obviously!) I would like to get $275.00 USD + Shipping.
Note that I will only accept PayPal as payment and you have to have a PayPal verified email, account, and shipping address! If interested, please PM me your offer and I will get back to you as soon as possible. Thanks!
Links to where I purchased items if available:
Helder AIO 2.2 PCB - https://www.retrogamingnow.com/pro-shop ... -pcb-board
PRS-Tech PCB (4-Button) - http://www.ebay.com/itm/Gameboy-DMG-01- ... 2363938160?
Amazon 'BW' 3.5 inch TFT LCD Monitor - $17.15 $https://www.amazon.com/gp/product/B0045IIZKU
AliExpress 3.5 inch TFT LCD Display (Higher resolution than Amazon - runs off 5v without mod too) - https://www.aliexpress.com/snapshot/0.h ... 2715407296
PowerBoost 1000c Charger - https://www.adafruit.com/product/2465
Red Full Housing Case and Button Kit (DMG-01) - http://www.ebay.com/itm/152458574716?_t ... EBIDX%3AIT
White Full Housing Case and Button Kit (DMG-01) - http://www.ebay.com/itm/152458574716?_t ... EBIDX%3AIT
Gray Full Housing Case and Button Kit (DMG-01) - http://www.ebay.com/itm/152458574716?_t ... EBIDX%3AIT
Adafruit Speaker - https://www.adafruit.com/product/1890#tutorials
Retrofresh UK GBZ Glass Screen (Black 'Gameboy Zero' border) - http://www.retrofresh.uk/
Retrofresh UK GBZ Glass Screen (Gray 'Dot Matrix...' border) - http://www.retrofresh.uk/
Retrofresh UK Catridge Sticker (Black 'Pi') - http://www.retrofresh.uk/
Retrofresh UK Catridge Sticker (Green 'PCB') - http://www.retrofresh.uk/
Retrofresh UK Catridge Sticker (Black/White 'Messy NES') - http://www.retrofresh.uk/
Retrofresh UK Catridge Sticker (Blue 'RetroPie') - http://www.retrofresh.uk/
Kitsch Bent White 'Half Shell' Cartridge - http://store.kitsch-bent.com/product/cartridge-shells
PRS-Tech uSD Cart Board (Micro SD card to GameBoy slot cart) - viewtopic.php?f=3&t=1323
Helder Power strip for GBZ Project - http://www.ebay.com/itm/Power-Strip-PCB ... 1982896048?
Sparkfun micro usb breakout - https://www.sparkfun.com/products/12035
3000 mAH lipo battery - http://www.ebay.com/itm/291980481191?_t ... EBIDX%3AIT
Button pads (5x D-Pads, 3x dual button pads, and 5x Start/Select pads) - http://www.ebay.com/itm/381464569308?_t ... EBIDX%3AIT
Kitsch Bent Custom Buttons (White 'NES Style' includes 2 NES style buttons, D-Pad, Slot insert, and Power switch for DMG-01) - http://store.kitsch-bent.com/product/custom-buttons
Hand Held Legend Button Set (Includes full D-Pad, 2 small A/B buttons, and 2 outer buttons) -https://handheldlegend.com/collections/ ... rt-buttons
Safe Shutdown (Camble) - viewtopic.php?f=3&t=2260
GameBoy game shells (2 black, 1 white, 1 gray, 1 GameBoy color game) - Various eBay auctions.
GameBoy slot reader (Came from DS - note condition please - should work fine but no guarantee) - eBay auction for several DS PCBs.
Female USB ports, Power slide switches, Petentiometers, and Headphone jacks (various sources).
Miscellaneous Printed Parts (I printed all of these so no source).
Pictures:
Thanks!
[SOLD] Huge Lot of My Brand New GBZ Parts
Who is online
Users browsing this forum: No registered users and 1 guest