Another GBZ

[moooarcuuuus]

The data have to be slow because the packages otherwise will fly out of the cables due to the centrifugal force in the curves. Printed circuit board conductors have a higher holding force.

[YaYa]

Owww didn't think about that, you're right... but if we put an electro magnet on the opposite side of a curve, it will maintain the data flow in the line, we can power the magnet directly from usb to get 5V and make it more attractive

[nexus23k]

Hi, makes no Problem! The truth Data seeks its way This Cable is very good conductive. Conductor material is copper. I use it about 5 Jears for all my Mods... Exakt lengh is 10cm and have test it with 20cm! About from 30cm maybe makes Problem!? Not tested. The only problem with the GBZ ist the screen begins flickering after about +- 10 min. I think the Problem is the Power Cord who is to near on the Caps? At first have used this thin Cable for the Psu to and now changed with larger cross section. Makes no different, sometimes the Screen begins to flicker. Here some Pics from my Gameboo. Cable lengh is 18cm to rotate the Screen, without Problems.

[YaYa]

I’ll try your method then, thank you !

[Vineheart01]

Holy wires batman!

That is one thing i really do NOT want to mess with is trying to solder that many wires onto a flippin' ribbon cable lol. That had to be tedious as heck to do that many wires in a tiny space.