I've torn down the bittboy and am trying to figure out if the existing screen can be used with a rpi zero.
The panel is a hitachi 2.2 inch IPS display but the ribbon cable doesn't look like any of the connectors I've seen in the [Guide] ili9341 SPI TFT Screen on Retropie http://www.sudomod.com/forum/viewtopic. ... 2&start=10 thread.
Any thoughts on how to figure out if it can be done?
Bittboy screen with rpi?
- moosepr
- Posts: 524
- Joined: Wed Jan 25, 2017 6:18 am
- Has thanked: 69 times
- Been thanked: 241 times
- Contact:
Re: Bittboy screen with rpi?
The first step is to find a data sheet/pinout for the screen. That will then let you see what input the screen will take, and you can go from there
Get a small cheep LCD in your project https://www.sudomod.com/forum/viewtopic.php?f=22&t=2312
Wrap it all round a battery https://www.sudomod.com/forum/viewtopic.php?f=13&t=2292
Or use a custom PCB to make it really small https://www.sudomod.com/forum/viewtopic.php?f=13&t=2512
or make it really really really really tiny!! https://www.sudomod.com/forum/viewtopic.php?f=13&t=2919
Wrap it all round a battery https://www.sudomod.com/forum/viewtopic.php?f=13&t=2292
Or use a custom PCB to make it really small https://www.sudomod.com/forum/viewtopic.php?f=13&t=2512
or make it really really really really tiny!! https://www.sudomod.com/forum/viewtopic.php?f=13&t=2919
- moosepr
- Posts: 524
- Joined: Wed Jan 25, 2017 6:18 am
- Has thanked: 69 times
- Been thanked: 241 times
- Contact:
Re: Bittboy screen with rpi?
Just done a quick bit of searching and it looks similar to this
http://s.aliexpress.com/J7NVrUzm
The pin count is right, and some basic pattern matching in the ribbon looks to match the pinout too!
http://s.aliexpress.com/J7NVrUzm
The pin count is right, and some basic pattern matching in the ribbon looks to match the pinout too!
Get a small cheep LCD in your project https://www.sudomod.com/forum/viewtopic.php?f=22&t=2312
Wrap it all round a battery https://www.sudomod.com/forum/viewtopic.php?f=13&t=2292
Or use a custom PCB to make it really small https://www.sudomod.com/forum/viewtopic.php?f=13&t=2512
or make it really really really really tiny!! https://www.sudomod.com/forum/viewtopic.php?f=13&t=2919
Wrap it all round a battery https://www.sudomod.com/forum/viewtopic.php?f=13&t=2292
Or use a custom PCB to make it really small https://www.sudomod.com/forum/viewtopic.php?f=13&t=2512
or make it really really really really tiny!! https://www.sudomod.com/forum/viewtopic.php?f=13&t=2919
Who is online
Users browsing this forum: No registered users and 1 guest