(Solved)Board not booting.

[Robochris]

So I got all the components soldered on. I’ve followed every trace I could find. It seems like the Pi isn’t getting power. I have lights on the charger and on the small board with the switch that come on. I don’t know what to check from here. Also should I be able to detect continuity on both sides of a resistor?

Thoughts?

Edit: I can plug power directly into the Pi and everything seems to work as it should

[KonnorJ]

Check your pololuand tp4056 are installed correctly

[Robochris]

Check your pololuand tp4056 are installed correctly

I’ll check again but I have reflowed and checked continuity. I’ve tried following the traces from the power pins on the Pi but but end up at the screen or audio circuit.

[Robochris]

Reflowed solder for the third time and that seemed to work. Odd because I had continuity on all points. But oh well, it works. Now for my audio problem.