Hi guys, i was really intrigues by wermy's project on youtube. Decided to get all custom parts to start building my own GBZ.
Heres the twist, I have no background on the software or hardware. I have ordered all the parts in(hopefully) and starting to do some soldering.
1st issue i encounter
Got this car camera screen from aliexpress. Never seen it in any of the sudomod archive for this model.
Need help on 12v to 5V mod. Any kind souls pls!!!
2nd tested my Pi zero, was running alright.after connecting it as per wermy "custom parts gbz", the pi LED doesn't light up anymore! Disconnected all the soldered wire cables and tested but still no light.
12v to 5v mod
- tinkerBOY
- Posts: 710
- Joined: Tue May 30, 2017 4:00 am
- Has thanked: 294 times
- Been thanked: 206 times
Re: 12v to 5v mod
I have the same screen.
Please see picture on how to do the 5v mod.
Please see picture on how to do the 5v mod.
- Attachments
-
- IMG_1401.JPG (2.25 MiB) Viewed 3681 times
New! tinkerBOY PowerSwitch v1.0 with Safe Shutdown
Game Boy Zero Controllers available @ tinkerBOY.xyz * Support
tinkerBOY Controller v3.0 - built-in usb controller, usb audio, and usb hub
tinkerBOY Controller v2.0 - GPIO buttons and builtin PWM Audio and Amplifier
tinkerBOY Controller v1.1 - simple pcb button
* DPI Adapter - better display for GBZ
* keyboard converters - IBM XT/AT Soarer's Converter | ADB to USB Converter
Game Boy Zero Controllers available @ tinkerBOY.xyz * Support
tinkerBOY Controller v3.0 - built-in usb controller, usb audio, and usb hub
tinkerBOY Controller v2.0 - GPIO buttons and builtin PWM Audio and Amplifier
tinkerBOY Controller v1.1 - simple pcb button
* DPI Adapter - better display for GBZ
* keyboard converters - IBM XT/AT Soarer's Converter | ADB to USB Converter
- Mikethesith200
- Posts: 60
- Joined: Tue Nov 29, 2016 3:20 am
- Has thanked: 39 times
- Been thanked: 10 times
Re: 12v to 5v mod
I believe you fried it , mate.
Botakincwcsoo wrote: ↑Mon May 29, 2017 7:09 amHi guys, i was really intrigues by wermy's project on youtube. Decided to get all custom parts to start building my own GBZ.
Heres the twist, I have no background on the software or hardware. I have ordered all the parts in(hopefully) and starting to do some soldering.
1st issue i encounter
IMG_7572.JPG
Got this car camera screen from aliexpress. Never seen it in any of the sudomod archive for this model.
Need help on 12v to 5V mod. Any kind souls pls!!!
2nd tested my Pi zero, was running alright.after connecting it as per wermy "custom parts gbz", the pi LED doesn't light up anymore! Disconnected all the soldered wire cables and tested but still no light.
Who is online
Users browsing this forum: No registered users and 1 guest