Display! How to fit? How can convert to 5v?

Angelino · Post by **Angelino** » Thu Apr 13, 2017 6:04 am

Hello, i've buyed this screen from Aliexpress.
How can convert it to 5v?
How can fit into DMG-01 Case? What part i can cut?

Please Help!

kubino · Post by **kubino** » Mon Apr 17, 2017 9:30 am

You need to desolder few parts and convert driver to 5v only:

here is how my mod :

Maybe you can remove entire button part to save more space but haven't tested this and you will loose ability to adjust contrast/brightness.

Angelino · Post by **Angelino** » Wed Apr 19, 2017 11:52 pm

Very thanks. I love you.

moyason · Post by **moyason** » Thu Apr 27, 2017 9:01 am

I do not see the image well, the white wire is soldered?
where ?

thanks for everything

kubino · Post by **kubino** » Thu Apr 27, 2017 10:58 am

in my image white is unsoldered, but you can leave it soldered to AV2 or completely remove and use just 3 wires

moyason · Post by **moyason** » Thu Apr 27, 2017 11:30 am

Ok. I test It. Thank you

brigghius · Post by **brigghius** » Sat Apr 29, 2017 3:33 pm

hi all, i have this same pcb, but also with your images, i have this problem:

[youtube]https://www.youtube.com/watch?v=f4vAgs4lINo[/youtube]

Why?

brigghius · Post by **brigghius** » Thu May 04, 2017 9:48 am

To reduce the pcb, can i cut in this way without error?

boyer86 · Post by **boyer86** » Tue Aug 22, 2017 11:11 pm

Thank you so much!