Banjokazooie Gameboy v2.0
- banjokazooie
- Posts: 211
- Joined: Thu May 19, 2016 1:14 pm
- Location: Usa
- Been thanked: 171 times
- Contact:
Banjokazooie Gameboy v2.0
Here is my latest gameboy build that include Raspberry pi 2, USB sound card, 2500mAh battery, Leonardo pro Micro, Powerboost 1000C, Camble Safe shutdown v1.2, Screen cover and label from retrofresh.uk
Front side
Top Side with transparent gameboy color cartridge and micro SD card slot
Left side with Powerboost micro usb
Right side with volume control, USB port and Trigger switch made from LED
Inside front part
Controll PCB
Inside bottom part
Battery compartment with JST connector
Front side
Top Side with transparent gameboy color cartridge and micro SD card slot
Left side with Powerboost micro usb
Right side with volume control, USB port and Trigger switch made from LED
Inside front part
Controll PCB
Inside bottom part
Battery compartment with JST connector
-
- Posts: 392
- Joined: Thu Jun 09, 2016 4:17 am
- Location: uk
- Has thanked: 76 times
- Been thanked: 51 times
Re: Banjokazooie Gameboy v2.0
that is one of the nicest/cleanest builds i have seen on here!
really good!!
really good!!
Check out my modding and repair channel of retro and modern consoles:
https://www.youtube.com/channel/UCFz7yW ... GtQ/videos
https://www.youtube.com/channel/UCFz7yW ... GtQ/videos
- Robochris
- Posts: 310
- Joined: Thu Feb 16, 2017 7:49 am
- Location: Ohio
- Has thanked: 82 times
- Been thanked: 41 times
Re: Banjokazooie Gameboy v2.0
Looks fantastic. I'm going for the same color scheme. Where did you get your buttons?
"What a horrible night to have a curse."
VMU viewtopic.php?f=62&t=7623
Gbz1 viewtopic.php?f=43&t=2853
Gbz2 viewtopic.php?f=43&t=3174
Gbz3 viewtopic.php?f=43&t=6095&p=62287#p62287
Mintypi viewtopic.php?f=32&t=3580
PocketPi viewtopic.php?f=43&t=8643
VMU viewtopic.php?f=62&t=7623
Gbz1 viewtopic.php?f=43&t=2853
Gbz2 viewtopic.php?f=43&t=3174
Gbz3 viewtopic.php?f=43&t=6095&p=62287#p62287
Mintypi viewtopic.php?f=32&t=3580
PocketPi viewtopic.php?f=43&t=8643
Re: Banjokazooie Gameboy v2.0
Damn, this might be the best-looking build I've seen on this site. What did you use to get all your 3D printed parts in so cleanly? Hot glue, epoxy?
I've just finished my milk.
- Lphillimore
- Posts: 993
- Joined: Sat Jan 07, 2017 7:03 pm
- Location: Perth, WA
- Has thanked: 796 times
- Been thanked: 527 times
Re: Banjokazooie Gameboy v2.0
This looks so good
Maybe a silly question...screen looks upside down from picture Showing it glued down.... Did you flip this in the settings?
Cheers
Maybe a silly question...screen looks upside down from picture Showing it glued down.... Did you flip this in the settings?
Cheers
mintyPi Giveaway [CLOSED]:
http://www.sudomod.com/forum/viewtopic.php?f=38&t=3456
Builds:
GBZ
http://www.sudomod.com/forum/viewtopic.php?f=9&t=2838
mintyPi
http://www.sudomod.com/forum/viewtopic.php?f=32&t=3468
Kite SAIO
http://www.sudomod.com/forum/viewtopic.php?f=9&t=3075
Dreamcast VMU
https://sudomod.com/forum/viewtopic.php ... 133#p62133
http://www.sudomod.com/forum/viewtopic.php?f=38&t=3456
Builds:
GBZ
http://www.sudomod.com/forum/viewtopic.php?f=9&t=2838
mintyPi
http://www.sudomod.com/forum/viewtopic.php?f=32&t=3468
Kite SAIO
http://www.sudomod.com/forum/viewtopic.php?f=9&t=3075
Dreamcast VMU
https://sudomod.com/forum/viewtopic.php ... 133#p62133
- banjokazooie
- Posts: 211
- Joined: Thu May 19, 2016 1:14 pm
- Location: Usa
- Been thanked: 171 times
- Contact:
Re: Banjokazooie Gameboy v2.0
I have used epoxy, hardens in 5 minutes and stays clear but can be removed in first 24 hours if you messed something up.muniosi wrote:Damn, this might be the best-looking build I've seen on this site. What did you use to get all your 3D printed parts in so cleanly? Hot glue, epoxy?
http://www.ebay.co.uk/itm/like/UniBond- ... RTM2063723
- banjokazooie
- Posts: 211
- Joined: Thu May 19, 2016 1:14 pm
- Location: Usa
- Been thanked: 171 times
- Contact:
Re: Banjokazooie Gameboy v2.0
Yes you need to add display_rotate to config.txtLphillimore wrote:This looks so good
Maybe a silly question...screen looks upside down from picture Showing it glued down.... Did you flip this in the settings?
Cheers
- banjokazooie
- Posts: 211
- Joined: Thu May 19, 2016 1:14 pm
- Location: Usa
- Been thanked: 171 times
- Contact:
Re: Banjokazooie Gameboy v2.0
A,B,X,Y buttons are from genuine snes controller and D-pad from original gameboy so you have authentic feel and look.Robochris wrote:Looks fantastic. I'm going for the same color scheme. Where did you get your buttons?
- Lphillimore
- Posts: 993
- Joined: Sat Jan 07, 2017 7:03 pm
- Location: Perth, WA
- Has thanked: 796 times
- Been thanked: 527 times
Re: Banjokazooie Gameboy v2.0
@banjokazooie Thanks, ill do that on my latest build as flipping it gives me move space around the X and Y buttons
mintyPi Giveaway [CLOSED]:
http://www.sudomod.com/forum/viewtopic.php?f=38&t=3456
Builds:
GBZ
http://www.sudomod.com/forum/viewtopic.php?f=9&t=2838
mintyPi
http://www.sudomod.com/forum/viewtopic.php?f=32&t=3468
Kite SAIO
http://www.sudomod.com/forum/viewtopic.php?f=9&t=3075
Dreamcast VMU
https://sudomod.com/forum/viewtopic.php ... 133#p62133
http://www.sudomod.com/forum/viewtopic.php?f=38&t=3456
Builds:
GBZ
http://www.sudomod.com/forum/viewtopic.php?f=9&t=2838
mintyPi
http://www.sudomod.com/forum/viewtopic.php?f=32&t=3468
Kite SAIO
http://www.sudomod.com/forum/viewtopic.php?f=9&t=3075
Dreamcast VMU
https://sudomod.com/forum/viewtopic.php ... 133#p62133
Who is online
Users browsing this forum: No registered users and 1 guest