Veteran's 1st GBZ (No Hot Glue) Completed

Show off your completed Game Boy Zero, or post your build logs here!
User avatar
VeteranGamer
Posts: 1738
Joined: Thu Jan 26, 2017 11:12 am
Location: London, UK
Has thanked: 528 times
Been thanked: 909 times

Veteran's 1st GBZ (No Hot Glue) Completed

Post by VeteranGamer » Wed Apr 12, 2017 3:39 am

firstly i'd like to thank

wermy
dominator
Helder
Camble
abrugsch
and last but not least the Sudomod community


finally received my safe shutdown, so the final assembly can be done (still some tweaks to be made)

I epoxy'd some 3d printed parts that will hold the usb socket, tactile buttons, powerboost and power socket (using a 3.5mm not usb) most of these will be held in with VHB tape this will eliminate the use of hot glue.
not sure how durable it will be, but one thing is certain that it will not be a messy look and i will not have to worry about heat softening the glue



i'm also using JST connetions for the wiring between the housings (front & Back)

Image


everything is ready to be installed, just trying to figure out where to put a couple of led (one for power the other for charging/charged)



Image

Image

Image


i've also re-used the original screw post by epoxying them into the 3d printed screen holder also made a holder for the volume wheel...


Image

Image

Image


also was able to install the screen adjustment board (replaced the original buttons with shorter buttons, so their more flush with the shell)


Image

Image


been really busy, but managed to find 5 mins to start getting the safe shutdown ready to test/install


Image

Image

Image


just the pi zero w left to install and a few wires to solder (ohh and the power socket)


Image


ignore the the bottom left (audio issues were just a headache, it works and thats all that matters for now)

Image

Image


everything installed

Image

Image


case closed

Image

Image

Image

Image

Image

Image

Image

Image


still got one or two things to do, like install 2 leds for power & charging/charged.... also gonna get the cartridge reader done...

gonna let my son stress test it for a bit, before i open it up again



installed some leds

1 x blue for power on


Image

Image


1 x red & green for charging and charged (bi-colour led)


Image

Image

Image


onced charged will upload it lit green



just the cart reader left
Last edited by VeteranGamer on Sun May 07, 2017 1:13 am, edited 8 times in total.

Ransom
Posts: 4
Joined: Wed Apr 12, 2017 11:04 am
Has thanked: 1 time
Been thanked: 1 time

Re: VeteranGamer 1st GBZ (No Hot Glue)

Post by Ransom » Wed Apr 12, 2017 11:09 am

Looks like a great start to your build (waiting for the parts to start my own soon). May I ask what battery you ended up going with? I like that yours fits into the battery compartment without having to cut it away, and it precisely how I'd like to accomplish mine.

User avatar
VeteranGamer
Posts: 1738
Joined: Thu Jan 26, 2017 11:12 am
Location: London, UK
Has thanked: 528 times
Been thanked: 909 times

Re: VeteranGamer 1st GBZ (No Hot Glue)

Post by VeteranGamer » Wed Apr 12, 2017 1:15 pm

Ransom wrote:
Wed Apr 12, 2017 11:09 am
May I ask what battery you ended up going with? I like that yours fits into the battery compartment without having to cut it away, and it precisely how I'd like to accomplish mine.
https://www.aliexpress.com/item/Dual-ha ... 0.0.JUsMTA

i got mine from this seller on aliexpress, i actually bought it for a couple of dollars less (the price for some reason goes up & down quite a bit) so if you have an account put it in your cart and it will go down after a bit...


second option if you wanna keep the battery compartment is to keep an eye on this thread

viewtopic.php?f=3&t=2320

the preorder is closed, but aparently some will be available once he has them in hand


good luck with your build

User avatar
ShadowFax
Posts: 33
Joined: Tue Aug 30, 2016 6:56 pm
Has thanked: 25 times
Been thanked: 6 times

Re: VeteranGamer 1st GBZ (No Hot Glue)

Post by ShadowFax » Wed Apr 12, 2017 10:37 pm

Looking forward to your build!
Seems like its going to be a clean build.
And good luck!

Ransom
Posts: 4
Joined: Wed Apr 12, 2017 11:04 am
Has thanked: 1 time
Been thanked: 1 time

Re: VeteranGamer 1st GBZ (No Hot Glue)

Post by Ransom » Thu Apr 13, 2017 7:59 am

VeteranGamer wrote:
Wed Apr 12, 2017 1:15 pm
https://www.aliexpress.com/item/Dual-ha ... 0.0.JUsMTA

i got mine from this seller on aliexpress, i actually bought it for a couple of dollars less (the price for some reason goes up & down quite a bit) so if you have an account put it in your cart and it will go down after a bit...


second option if you wanna keep the battery compartment is to keep an eye on this thread

viewtopic.php?f=3&t=2320

the preorder is closed, but aparently some will be available once he has them in hand


good luck with your build
Thanks for the link! For some reason, that particular seller wants to charge about $40 to ship, so I may have to keep looking, haha. Does help to see the measurements of that one though and see if I can find something comparable.

I did see the thread to that sudomod battery pack. I'll keep an eye out for that as well.


User avatar
JohnTheKing
Posts: 23
Joined: Wed Apr 12, 2017 7:40 pm
Location: USA
Has thanked: 21 times
Been thanked: 5 times
Contact:

Re: VeteranGamer 1st GBZ (No Hot Glue)

Post by JohnTheKing » Sun Apr 16, 2017 1:56 am

Would this be a good option for fellows like myself who are not the best (brand new) to soldering?

User avatar
abrugsch
Posts: 971
Joined: Tue Aug 02, 2016 10:00 am
Has thanked: 356 times
Been thanked: 430 times
Contact:

Re: VeteranGamer 1st GBZ (No Hot Glue)

Post by abrugsch » Sun Apr 16, 2017 6:56 am

JohnTheKing wrote:
Sun Apr 16, 2017 1:56 am
Would this be a good option for fellows like myself who are not the best (brand new) to soldering?
have you read my guide?

simondid
Posts: 6
Joined: Tue Apr 11, 2017 3:38 am

Re: VeteranGamer 1st GBZ (No Hot Glue)

Post by simondid » Sun Apr 16, 2017 8:14 am

what is this safe shutdown module and do you have a link / description on how it works

User avatar
VeteranGamer
Posts: 1738
Joined: Thu Jan 26, 2017 11:12 am
Location: London, UK
Has thanked: 528 times
Been thanked: 909 times

Re: VeteranGamer 1st GBZ (No Hot Glue)

Post by VeteranGamer » Sun Apr 16, 2017 8:53 am

simondid wrote:
Sun Apr 16, 2017 8:14 am
what is this safe shutdown module and do you have a link / description on how it works
the safe shutdown switch/module/board allows you to shutdown your retropie at the flick of a switch.... if you dont want one you manually have to shutdown via the menus...

one thing to note SD cards can become corrupted if they are not used properly or over used (reading/writing) or just poor quality... one way this could even happen is if you continually fail to shutdown your system properly (just cut the power)

for me it was a no brainer, as this build is for my son... but its not vital for everyones build (it is a nice touch just to turn it on and off from the switch)


viewtopic.php?f=3&t=2348

viewtopic.php?f=3&t=2260

theirs two types, the variant depends on the type of power boost you have...

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest