hueblo's GBZ build(complete)
hueblo's GBZ build(complete)
I've been posting images everywhere else might as well post them here. I was pretty much following the guide until I saw all the custom parts being developed. Not sure on the ETA, waiting on Cambles shutdown PCB to be ready and having a weird wireless issue where its powered up but not detected by retropie.
Update: added parts list. Mostly to see how much I've spent
Update: Finally finished my GBZ. Mostly followed the guide except for the custom parts. Decided to take out the cartridge read feature since the cartridge insert I purchased failed and just decided to forgo it.
Shot out to the homies
@wermy
@helder
@camble
@popcorn
@felder
@dominator
Parts
Broken Gameboy: ebay
Raspberry Pie Zero: $5
Adafruit Screen: $44.95
Adafruit PowerBoost 1000C: $19.99
Adafruit Speaker: $1.50
PSP 1000 Analog stick: $3.50
Micro usb breakout board: $2.19 (took to long, don't recommend it)
Tactile buttons: $3.02
Helder's AIO: $41.28 (with shipping)
DMG buttons: $3.50
kitsch-bent SD cartridge incert: $18.00
Camble's shutdown switch: $15.83
Dominator's Screen Surround: $19.00 (with custom labels)
RadioShack 10K-Ohm Wheel Potentiometer: $1.99
Accessories
Edimax Wifi: $8.99
Plugable Bluetooth: $13.95
8bitdo Retro Bluetooth Controller: $39 (returned it, current firmware is broken 1.70)
Targus USB hub: $11.56 (bought it for testing)
Helder's PWM Audio: $3 (for testing)
Tools
Dremel 4000 with 50 Accessories: $132.49 (was on sale when I bought it)
Innova Multimeter: $27
Vastar Solder Iron: $15.99
Vastar Solder Removal: $8
Case mods
[spoiler="Case Mods pretty much done, not my best work"][/spoiler]
5V conversion along with kitsch bent custom pcb
[spoiler="Adafruit 5V conversion"][/spoiler]
got Helders all in one in, having current issues but think it's a bad 1000C (helder already helping)
[spoiler="AIO"][/spoiler]
Finished Product
[spoiler="Finally"]This was my last image i took before I closed it up, also when I realized the power wires were too short[/spoiler]
Custom Labels I created for the community. My tech skills are minimal so my contribution are my photoshop skills.
[spoiler="Custom Labels"]
[/spoiler]
Custom Splash screen I created. I got a few more in mind.
[spoiler="Game Boy Zero Slash Screen"]https://youtu.be/JaMwmF3wmHY
[/spoiler]
Update: added parts list. Mostly to see how much I've spent
Update: Finally finished my GBZ. Mostly followed the guide except for the custom parts. Decided to take out the cartridge read feature since the cartridge insert I purchased failed and just decided to forgo it.
Shot out to the homies
@wermy
@helder
@camble
@popcorn
@felder
@dominator
Parts
Broken Gameboy: ebay
Raspberry Pie Zero: $5
Adafruit Screen: $44.95
Adafruit PowerBoost 1000C: $19.99
Adafruit Speaker: $1.50
PSP 1000 Analog stick: $3.50
Micro usb breakout board: $2.19 (took to long, don't recommend it)
Tactile buttons: $3.02
Helder's AIO: $41.28 (with shipping)
DMG buttons: $3.50
kitsch-bent SD cartridge incert: $18.00
Camble's shutdown switch: $15.83
Dominator's Screen Surround: $19.00 (with custom labels)
RadioShack 10K-Ohm Wheel Potentiometer: $1.99
Accessories
Edimax Wifi: $8.99
Plugable Bluetooth: $13.95
8bitdo Retro Bluetooth Controller: $39 (returned it, current firmware is broken 1.70)
Targus USB hub: $11.56 (bought it for testing)
Helder's PWM Audio: $3 (for testing)
Tools
Dremel 4000 with 50 Accessories: $132.49 (was on sale when I bought it)
Innova Multimeter: $27
Vastar Solder Iron: $15.99
Vastar Solder Removal: $8
Case mods
[spoiler="Case Mods pretty much done, not my best work"][/spoiler]
5V conversion along with kitsch bent custom pcb
[spoiler="Adafruit 5V conversion"][/spoiler]
got Helders all in one in, having current issues but think it's a bad 1000C (helder already helping)
[spoiler="AIO"][/spoiler]
Finished Product
[spoiler="Finally"]This was my last image i took before I closed it up, also when I realized the power wires were too short[/spoiler]
Custom Labels I created for the community. My tech skills are minimal so my contribution are my photoshop skills.
[spoiler="Custom Labels"]
[/spoiler]
Custom Splash screen I created. I got a few more in mind.
[spoiler="Game Boy Zero Slash Screen"]https://youtu.be/JaMwmF3wmHY
[/spoiler]
Last edited by hueblo on Thu Apr 06, 2017 3:25 pm, edited 6 times in total.
-
- Posts: 134
- Joined: Thu Jun 09, 2016 5:45 pm
- Has thanked: 33 times
- Been thanked: 29 times
Re: hueblo's GBZ build
Dude, I really like those custom cartridge decals! I want them just to stick on anything.
-
- Posts: 51
- Joined: Sat Aug 06, 2016 6:30 am
- Has thanked: 20 times
- Been thanked: 14 times
Re: hueblo's GBZ build
Nice build going on. I really like the bezel trim from the old screen.
Just joined the site a few days ago but have been reading info on GBZ from here for about a week. About to start my project hopefully next week. Just taking time to read, learn, and mock up at least on paper for now what I want to do.
Would love one of those Zelda decals for my cartridge.
Can you message me payment info if still available (paypal?)
Just joined the site a few days ago but have been reading info on GBZ from here for about a week. About to start my project hopefully next week. Just taking time to read, learn, and mock up at least on paper for now what I want to do.
Would love one of those Zelda decals for my cartridge.
Can you message me payment info if still available (paypal?)
- fdeluxe
- Posts: 71
- Joined: Tue Aug 23, 2016 10:16 am
- Has thanked: 12 times
- Been thanked: 27 times
- Contact:
Re: hueblo's GBZ build(complete)
Congratz on your first build! Why did you make such a big hole for the analog stick? oO
Re: hueblo's GBZ build(complete)
Because I'm an idiot and its the very first thing I did without really reading up on it =|fdeluxe wrote:Congratz on your first build! Why did you make such a big hole for the analog stick? oO
- fdeluxe
- Posts: 71
- Joined: Tue Aug 23, 2016 10:16 am
- Has thanked: 12 times
- Been thanked: 27 times
- Contact:
Re: hueblo's GBZ build(complete)
Such a shame. A hole a little bit smaller than the analog stick cap would have been enough
Who is online
Users browsing this forum: No registered users and 1 guest