3rd shell modification : power supply http://img15.hostingpics.net/pics/955509microusb.png Micro-usb hole http://img15.hostingpics.net/pics/193261batterydrill.png I had to cut this area in the cartridge support, else the 2500mah battery wouldn't fit with the cardrige cover on top of it. On this pict...

Something that support the battery would be nice & would avoid it to travel in the GBZ. I would make for little supports that you glue on the controller board with magnets in them. This base would allow to level up the battery support plate so that we can attach stuffs under it, like the three butto...

This controller board is awesome ! Nice job

Back button covers is indeed a nice idea !
I'm currious to see how you will fix the switches to the case, but I'm sure you'll come with something great

looking great! Thanks Mauros :D Looking good, love the bench drill mount, I have horrible hand pulse and could really use something like that, not sure how straight my cuts will be :lol: Thank you Robvp ! I wanted to make this modification for a long time and the GBZ project gave me the impulse. If...

Nice job ! Original schematic was really hard to understand.
This is crystal clear

All your buttons need to be connected to the same ground
You can solder the "third wire" directly on the ground you allready used on the teensy or if it's more convinient for you, on the controller PCB somewhere on your shared ground.

Genius also do mistakes from time to time

2nd shell modification : cutting the screen area http://img11.hostingpics.net/pics/283612P1050801.jpg Pillar drill modificication, in order to have a guide. http://img11.hostingpics.net/pics/786578screenprogress.png Close-up while grinding. http://img11.hostingpics.net/pics/704429fitscreen2.png Fitt...

I had the same issue. I used an "old" VGA cable




I first did some testing with a multimeter before to epoxy.