Hi, i will use this wiring, thanks for adding the picture.
I was also curios if the volume wheel should be before or after the amp.
I also have a tiny coax cabel i probably will use as audio wire.

If you are going to use the kitch bent filter, here is a diagram for mono audio that i just made up. **I edited the diagram a bit, so it is more clear. this is how you would wire mono sound** http://i.imgur.com/vricSnZ.jpg If you aren't using the filter your purple wire from the GIPO will go direct...

It is a 3.5 screen.
Had to cut the sides of the pocket, and the screen is visible from the outside.

Havent been modding Zero's for about 9 months now. Sorry for bad English. Short story: Seems like the power module has to be "activated" by connecting micro usb to it and remove the micro usb, to get power out from usb and blue light on. Anyone else experience this? Long story: So i decided to take ...

Here is the new project, with pictures from inside setup, it is not finished yet.

Working on a project, building a raspberry pi zero into a Gameboy Pocket.
Have one betaversion up an go, working on a new modified one now.

Here are some pics

Running this screen on 5v with this mod.
Leg on regulator is lifted from pcb and is only in contact with jumperwire.
If leg was connected to both pcb and jumperwire screen was very unstable.

Have added this line to the config txt: dtoverlay=pwm,pin=18,func=2 Line out is taken from gpio 18 and ground from the nearby groundpoint, goes through homemade filter a amp and to speaker. Ofcourse with my luck/experience no sound, only very low hizz noise from speaker when i connect power to the a...

Wow grats on making this looking somewhat user-friendly. I took one look at the adafruit guide and was like NOPE not worth the effort, but this actually looks quite doable now. Would someone mind telling me what I would need to change on this if I only wanted mono sound? I don't plan to have a head...

Sure it does. It says it at the bottom of the page. Here is the command. Make retrograme In the middel of tutorial say this: Classic retrogame: Edit Source Code Assigning keys and buttons in the old retrogame is quite a bit more involved…this is why we recommend just downloading and installing the ...