for some reason my Pi wont boot with the mintyPi image flashed onto the SD card. ive tried it numerous times. it boots fine with the standard retropie image. am i doing something wrong? im using SDFormatter then flashed it on with Win32DiscImager then tried Etcher.

sp i soldered my pi zero to the pcb and plugged in the screen to test. at first i got a white scree. then the black boot up screen for retropie popped up for a second. then went white again. now im only getting a white screen. what am i doing wrong?

Does anybody have a link to the correct size tactile switches for the L and R buttons? It's the last part I need I just can't seem to find them in the exact size listed on the wiki

What else will I need to buy along with this board to build a complete GBZ?

image.jpeg Totally did! Can't wait for the screen to get here. Thanks for the help :) let me pick your brain on one other thing regarding the SD card. I bought one of kitsch-bents cartridges and I'm having trouble wiring it up to my pi. It seems he calls that data_in and data_out test pads should b...

I received this one too and returned it since the board is far too large and would take up too much space in the gameboy

Yea I guess I can try that. It is pumping out power to run the teensy tho. Although I just fired it back up and now even the teensy wired straight into the Pi isn't working anymore for some reason So there is absolutely no drop in resistance between that leg and pad 23? You are describing exactly m...

Hey there, Did you try the USB hub out before wiring it up, after you removed the USB ports? If that worked then I'd try resoldering with slightly shorter stripped parts on your wires, both the white and green ones look pretty dang close to those usb port legs (hard to tell from a picture though). ...

Hey there, Did you try the USB hub out before wiring it up, after you removed the USB ports? If that worked then I'd try resoldering with slightly shorter stripped parts on your wires, both the white and green ones look pretty dang close to those usb port legs (hard to tell from a picture though). ...

So I just finished my gameboy zero. (Skipping audio for now since I'm missing a volume wheel) but I fire it up and the USB hub is not working. Controls from teensy won't work and neither will anything else I plug into the side USB port. What could be the issue? I checked and I don't think I shorted ...