Hi, right now I am trying to wire up a Joycon Analog stick but am having some issues with it. I just wanted some clarification that my wiring is right/wrong. Here is how it is wired to my breakout board. joycon wiring sudomod.png And here is the PCB layout. pcb123.PNG I am pretty sure my wiring is w...

According to diode IR204-A data sheet typical current should be 20mA at 1.2 Volt forward voltage. Meaning your resistor should drop the remaining 3.8 Volts from the 5 Volt power source. 3.8V at 0.02A resulting a resistor value of 190 Ohm. Or something available close to this value. I tried a 170ohm...

tinkerBOY wrote: ↑

Sat Feb 16, 2019 3:01 am

Try 1k-10k ohm resistor.

I tried a 14k resistor which brought the voltage down to 1v but still nothing. Can I use my phone's camera to check to see if the led is on? And is there a certain voltage that I should give the led?

So I am using 940nm leds(IR204-A to be specific) to make a custom Wii sensor bar. I am having troubles wiring them up and am hoping I can get some assistance. So I know that I need a resistor with the led so that it doesn't burn out. I went here https://www.digikey.ca/en/resources/conversion-calcula...

Connect 5v to pin 3 on the chip Is this correct (see pic)? Thanks for your help! Another thing you could do to make sure its the correct point is to power the screen with 12v, then take your multimeter and measure the voltage on that pin, if its 5v then you should be able to just apply 5v directly ...

I am selling one of my Gameboy Zeros. This specs of this unit are: Raspberry Pi Zero W 3.5 inch composite screen Working speaker, headphone jack, and volume wheel 2600mAh battery 16gb SD Card Some pictures: IMG_0783.JPG IMG_0774.JPG IMG_0776.JPG IMG_0779.JPG IMG_0781.JPG IMG_0787.JPG Its currently o...

I am currently trying to wire up a 5 pin potentiometer and I cant get it to work. I've followed 2 different diagram and both of them didn't work for me. Does anyone have a diagram that has worked for them?

I have a few items For Sale OR Trade •9 Potentiometers $1each OR all 9 for $4 shipped within local 48 U.S. •9 Micro USB Break Out Board 75¢ each OR $3 shipped within local 48 U.S. •1 Camble Safe Shut Down Switch v1.2 for Power Boost - $15 shipped within local 48 U.S. •1 RasPi Zero Board $13 shipped...

Right now, im trying to get a 3 pin potentiometer from Handheld Legend to work ( https://handheldlegend.com/collections/game-boy-zero/products/dial-potentiometer-for-volume-and-contrast ) I can't find an exact pintout for this potentiometer. but from what I read, the left pin is groud, the middle pi...

Hey all, I have GBZ up for sale. It's listed on eBay. Check the link for all the info, the price on eBay is high, but I am open to offers. If you are interested let me know via PM, since we can make a deal personally, or through eBay. Shipping to Canada or US, not sure on international shipping, I ...