Your white wire on the Pi is connected correctly to the TV pin, but that yellow wire is connected to a ground pad on the Pi. so I need to put the yellow where the white is currently and what about the white? do i splice both wires to the same port? the yellow and white wires are separate inputs - A...

Dividion wrote: ↑

Mon Jun 29, 2020 3:51 pm

Your white wire on the Pi is connected correctly to the TV pin, but that yellow wire is connected to a ground pad on the Pi.

so I need to put the yellow where the white is currently and what about the white? do i splice both wires to the same port?

I have connected the Adafruit screen to the RPI0 for testing purposes and I can not get it to connect to the composite display. If I plug in an HDMI Cable I get output just fine. I have adjusted my config.txt file as others have suggested after searching for the issue online but it still does not wo...

So I finally got all my parts wired and mounted and I have run into two major issues. 1st Issue, with everything wired up, when I connect the power, the power indicator (on the powerboost) does not turn on, only the charging indicator. (so the system is not powered). I went to the power strip and d...

So I finally got all my parts wired and mounted and I have run into two major issues. 1st Issue, with everything wired up, when I connect the power, the power indicator (on the powerboost) does not turn on, only the charging indicator. (so the system is not powered). I went to the power strip and de...

Hey all, This may be a stupid question but it has been bugging me and I am at a loss... I am using the USB Soundcard setup but I cannot figure out how to have my cake and eat it too... I was thinking the wiring layout would be: USB Hub ---- USB Soundcard ---- Stereo Amp ---- Pot Wheel ---- 3.5mm jac...

OP any luck? I am also having this exact same issue with the exact same screen. Check if your solder is not touching any other components. I checked that pretty carefully and the only questionable spot place where it is really close to other components is on the controller board modification (chang...

OP any luck? I am also having this exact same issue with the exact same screen.