I wired the screen up, like its done in this guide: https://sudomod.com/forum/viewtopic.php?f=22&p=60709#p60709 Screen<------------>Raspberry Pi 3 or zero SDO(MISO)<----->PIN 21 LED<-------------->Pin 2 (5V) SCK<-------------->Pin 23 SDI(MOSI)<----->Pin 19 DC<--------------->Pin 22 RESET<----------...

I wired the screen up, like its done in this guide: https://sudomod.com/forum/viewtopic.php?f=22&p=60709#p60709 Screen<------------>Raspberry Pi 3 or zero SDO(MISO)<----->PIN 21 LED<-------------->Pin 2 (5V) SCK<-------------->Pin 23 SDI(MOSI)<----->Pin 19 DC<--------------->Pin 22 RESET<-----------...

Hi, for my GBC zero i wantet to use the micro B port, which is allready used for power input to the charger, as an usb port too. A simple schematic how it is wired up: https://i.imgur.com/Fb6A9aX.png Is it possible to get power to the micro b port without frying the lipo charger ? The only way i can...

I wonder if you could leave the screen just how you have it then adjust the overscan on the right side to fit within the screen cover? Yes, with overscan i can center it. But retropie is running in 16:9 (also gba, snes ...). In retroarch i can switch to 5:4 aspect ratio, but with image cropping (wh...

wermy wrote: ↑

Wed Mar 06, 2019 10:04 am

Nice work. Moving this to the GBZ showoff section, FYI.

I thought there are only DMGs in this section

Nice! I been meaning to try a gbc after all the other projects I have backed up. The 2.4 inch spi screen fits just between the status led and the ON/OFF switch, but it is shifted a little bit to the left. Btw: the status led does not like 3,3 volt, i burned it too death yesterday, so i will be repl...

- Pi Zero W - 2.4 inch SPI lcd - 2.5 watt stereo amp - 680 mAh lipo battery - 2A lipo charger from the original Game Boy Color: - case and buttons - speaker - pcb - volume wheel - 3.5mm audio jack - ON/OFF switch - coming in from shenzen: - 850 mAh or 1000 mAh lipo - i2s audio module - new case with...

Hi, i am using the ili9341 for the gbc , now i need to scale down the image from 16:9 to 4:3. I need to move the image a litle bit to the right, but i am sure i can do that with overscan function. I tried to scale the image down in the config.txt, but this is just working in the termínal. Does anyon...

Thanks to bamsegod and his very nice guide: https://sudomod.com/forum/viewtopic.php?f=22&p=60709#p60709 i finaly got these spi screens working at 60 fps, and they are amazing. So til now its just a 2.2" SPI LCD with a PI Zero W and some silent tactile switches mounted on a single layer perf board. D...

Verry Nice !

But how is the lcd still working after you removed capacitors and else ?