I found what the problem was with my build... followed 144TECH's and VeteramGamer's suggestion and it was then when I realised that I had a problem with my Raspberry Pi Zero W's second micro usb port and hence lsusb command was not detecting it. I needed to buy a second Raspberry Pi Zero W in order ...

I had the same problem myself. Assuming the wiring is all correct the potentiometer wheel was my problem. Having changed it fix my problem and I was getting sound from both the speaker and the headphones.

Good luck!

Thanks @VeteranGamer for pointing that out. I've got some noise coming out from the headphones now! Although I am unable to get the sound from the game. I have been using the following guide to set up the audio but no avail http://www.sudomod.com/forum/viewtopic.php?f=20&t=144 My main problem is tha...

Ohhh damn it! Thank you for the wiring setup.

I am not 100% sure about the pinout for the wheel either!

Is the retropie configured as BOTH to get the sound?

I've got the diagram from one of the awesome posts in the forum.
Would that affect lsusb and dmesg not showing properly??

Hi guys, I need some help to find out why I am not getting the outcomes that I would expect. The symptoms I am expecting are that the audio and the external USB are not working. I believe this has something to do with the USB Hub I am using. Although is getting powered up through a power strip (than...

Wired the breakthrough power hub to power up all the different components; screen, raspberry pi zero w, external USB and USB sound card. The original issue raised in the post is still persisting and I am not sure what to do to solve the issue. The USB sound card displays the red LED consistently - t...

YaYa wrote: ↑

Thu Jul 20, 2017 11:44 am

You have shielding tape under the insulated tape ?

Well it's foil paper underneath the insulated tape. The same foil paper I use for baking

Thanks for the links. I shall try to shorten the wires as well as twisting and shielding. Currently the home made cartridge works as it is with the shielding (that's why it's covered with electric tape in the picture above).

Hi guys, I wanted to share with you the issue I have with a PRS-Tech Cartboard that goes inside the game cartridge. I cannot get the raspberry pi to turn on when using it. On the other hand, however when using a hand made cartridge with the SD adaptor it works fine. So much effort to get the cartrid...