Search found 21 matches

by Rider
Wed Jul 17, 2019 6:11 am
Forum: Support for Kite's Products
Topic: Back Buttons Kite CS lite
Replies: 4
Views: 3700

Re: Back Buttons Kite CS lite

kite wrote:
Wed Jul 17, 2019 4:28 am
As long as black is gnd (which can be confirmed by following the wire to the connector, which will have a labelled telling you the wire function) then order does not matter
Thanks, I was being an idiot. I’ve spotted the board even labels the L2R2 and ground.
by Rider
Wed Jul 17, 2019 6:09 am
Forum: Support for Kite's Products
Topic: Add LEDs to Kites CS lite
Replies: 7
Views: 4505

Re: Add LEDs to Kites CS lite

kite wrote:
Wed Jul 17, 2019 4:26 am
Resistors still required, check out the specifics on the FAQ: https://github.com/kiteretro/Circuit-Sw ... tatus-leds
Thanks for the reply dude
by Rider
Tue Jul 16, 2019 5:55 am
Forum: Support for Kite's Products
Topic: Add LEDs to Kites CS lite
Replies: 7
Views: 4505

Add LEDs to Kites CS lite

In previous builds of the kite CM3 and CS lite, I understood resisters were needed to add power, charge and activity LEDs. However, on the recent CS lite board, there appears to be solder points on the board for this. I am I correct in thinking I can just solder LEDs directly to the board now? there...
by Rider
Tue Jul 16, 2019 5:51 am
Forum: Support for Kite's Products
Topic: Back Buttons Kite CS lite
Replies: 4
Views: 3700

Back Buttons Kite CS lite

Ok, so apologies if this has been asked already and again sorry for being a bit dim with this.
On the Kite CS lite board, does it matter which colour wire I use for the back buttons, using the plug supplied in the kit?
by Rider
Sun Jul 07, 2019 9:46 am
Forum: Support (Game Boy Zero)
Topic: Megabat battery
Replies: 9
Views: 4983

Re: Megabat battery

Not all Chinese sellers take forever. If using AliExpress make sure to choose Ali express standard shipping or epacket. It's usually decent speeds. You could also consider the dextech battery too. https://www.sudomod.com/forum/viewtopic.php?f=38&t=2320 It’s cool, Galaxy Gaming have been in touch an...
by Rider
Sat Jul 06, 2019 7:52 pm
Forum: Support (Game Boy Zero)
Topic: Megabat battery
Replies: 9
Views: 4983

Re: Megabat battery

Any 125054 lipo (4000mah) I get mine from eBay or AliExpress. Lots of options. Just look for the best price Rodocop is right. A search on ebay.co.uk for "125054 battery" pulled up 2 results that appear to be the size you need. One for £8.99 and one for £9.79 . Yeah I saw the same results but they’r...
by Rider
Sat Jul 06, 2019 12:00 pm
Forum: Support (Game Boy Zero)
Topic: Megabat battery
Replies: 9
Views: 4983

Re: Megabat battery

Would this work? I’m sure it will fit ok as the GB case normally takes double A and these cells are the same size, but would it be ok?

https://shop.pimoroni.com/products/lith ... escription
by Rider
Sat Jul 06, 2019 4:02 am
Forum: Support (Game Boy Zero)
Topic: Megabat battery
Replies: 9
Views: 4983

Megabat battery

It would appear the megabat battery is out of stock in the UK, so does anybody have a recommendation for a good alternative?
by Rider
Tue Sep 26, 2017 4:31 am
Forum: Support (mintyPi)
Topic: How to Fix the dim LCD backlight or not showing an image
Replies: 37
Views: 29607

Re: How to Fix the dim LCD backlight or not showing an image

Helder wrote:
Tue Sep 26, 2017 3:21 am
There are 3 leds in the LCD so each LED has a pin on the ribbon if one is not making good contact one will dim out. Try realigning the ribbon again to see if it gets fixed.
Yep, that’s done it. Thanks Helder
by Rider
Tue Sep 26, 2017 2:40 am
Forum: Support (mintyPi)
Topic: How to Fix the dim LCD backlight or not showing an image
Replies: 37
Views: 29607

Re: How to Fix the dim LCD backlight or not showing an image

Is the likely to fix an area in the corner that has suddenly become dimmer? I noticed it on boot but it’s more obvious playing games now too. Not a big deal but I want it to be perfect