Helder wrote: ↑

Mon Sep 04, 2017 10:24 am

Show pictures of your install.

The above pictures or my minty pi image?

I have the new v3 minty pi image and the Battery Monitor installed on my pi but the green battery logo wont show. i held select and still nothing happened. Any Suggestions?

The ribbon itself the white ribbon with blue ends is what you tested? sounds like you're testing the ribbon connectors which can be tested using those test pads on the 2 pcbs with the white ribbon connected. This is how I tested it second. I think I just need a new ribbon cable. File_000.jpeg I nee...

I have some extra ribbons left over, but how are you testing continuity? You're supposed to remove the ribbon and test continuity on the same pin but on each end of the ribbon, is that how you're testing it? First I tested continuity from the 8 pin connector to the other with the ribbon connector s...

So from the GPIO to the test pads you get continuity? If so then from test pads under the 8pin connector to the LCD test pads you have continuity? I doubt the ribbon is bad but it's easy to check it with a continuity test. I tested continuity from the test pads to the 8 pin connector and they all c...

All GPIO connections are good but the from the test pads to the screen only VCC and SCK show up as connected on my multi meter. The HDMI output still works and everything else is solid. Does this mean I need a new ribbon or screen, or both. Also if it's a new ribbon cable I need where could I purcha...

The day before yesterday I dropped my Minty Pi :cry: . I tried to turn it on but the screen wasn't showing. The pi light was flashing green and the back-light of the screen was on but no display. I opened it up and checked continuity on everything, and unplugged, realigned, and checked the screen an...