Well actually I already posted the results in the help forum. And I fixed the problem. https://www.sudomod.com/forum/viewtopic.php?f=52&t=9001 For my soldering iron I use a Weller WE1010, or a WX2021 and I always use flux when soldering. There was no strain on the wire because I used a breadboard fo...

Little update, I tested the PSU with a battery and the original Gameboy DMG switch and it works! Thnx for the fast support.

Thanks for links of the switch and the scraping tool, i will definitely be getting those. But i decided to cut the trace some little further and it worked! i soldered a wire to the trace, because i didn't had any copper thin enough to repair the trace and the pad.

I’m trying to use the original gameboy dmg switch. I had a broken gameboy laying around so I desolderd all the parts I could use. Is there a better alternative for a switch?
Is it wise to have another go at cutting the EN trace?

So i tried to wire up the original GameBoy DMG switch. i needed a few tries but i figured it out. Then when i tried to wir it for final testing (everything on a breadboard) I destroyed my retro psu, because the solder pad of EN just came off. So there is no way i can solder a switch to it. Is there ...

So i figured it out myself, but now the next problem. I just destroyed my retro psu, because the solder pad of EN just came off! So there is no way i can solder a switch to it. Is there any change a trough hole version of the Retro PSU can be sold? because the wires keep coming off the pads, and as ...

Can anybody tell me how to wire the original dmg switch to the Retro PSU?

Anyone seen this yet? https://static.wixstatic.com/media/d9a075_e8775fc6ba4841cc888b73b2edb08257~mv2_d_2798_1330_s_2.png/v1/fill/w_1200,h_572,al_c,usm_0.66_1.00_0.01/LyraWix.png It”s CM3 based, and it got all sorts of features. https://ksr-ugc.imgix.net/assets/025/512/674/eb42e76b90f88eb2a3a964ce9d4...

Anyone tried to put the battery of a Nintendo switch in a pi project? It’s flat, it’s small, it’s 3,7 V and 4310 mAh. And it’s cheap. But there 5 wires coming out of it. 2 black (-), 2 red (+), and one grey? The + and - wires are probably just doubled for the current handeling but what’s the grey on...

If you google this you will get a lot of hits of one handed controllers for different game systems, so you would have reinvent the wheel.

http://game-accessibility.com/2015/08/0 ... stakaraad/

Check out this link.