Can't wait to see the guide. These buttons look great!! If you need more ideas for MTG, don't forget about the guilds. (Dimir fan myself)

So another wall I'm hitting is now I can't get the audio to come out of the speaker. It will always output sound through HDMI (via booting logo sound). Doing the method of PWN0 (pin 12) to Adafruit mono amp A+ input (A- set to pi ground). I have used the command at the end of config.txt: dtoverlay=p...

Yeah, that was the first thing i did, revert back to 12v, but there was no change in that. Also note its been awhile since i tested this LCD. Not sure what could have gone wrong since I kept it wrapped and boxed. But anyways, decided what the hell, and removed the IC completely at this point to make...

Did not work again after connecting the 64 after the fact again. Also connected the buttons with no change and also did swap the white side wiring. Currently at work but when I soldered to the leg I checked after the fact for bridging and did not. Also did order last night that LCD I put in the earl...

Thanks for the response, currently at work so I am limited on uploaded pictures http://i1186.photobucket.com/albums/z376/GreenTeaDrag0n/801A4130-7D9E-4EC1-B064-B6B152B4EC90_zpsh32yovie.jpeg I did also see the LCD you mentioned through the forums but still confused. Says it's 12v operating volts, but...

Hey Guys, been watching the forums for awhile and finally decided to take the leap into making my first gameboy zero. I did already get the following parts: (electronics atleast) Gameboy black case w/ buttons gameboy zero button PCB Tachometer Adafruit powerboost 1000c Battery Adafruit Mono 2.5w Spe...