Search found 266 matches

by Robochris
Fri May 10, 2019 6:24 pm
Forum: Support for Galaxy Gaming's Products
Topic: No Audio too - PocketPI FE
Replies: 20
Views: 965

Re: No Audio too - PocketPI FE

PS and I still don´t get why I have no shoulder buttons and even why the retropie doesn´t even recognize a button press if I bridge the two solder point on the main PCB itself. This should be a button press in any case. Are not getting any button presses? or just not L/R? I would check your solderi...
by Robochris
Wed May 08, 2019 2:56 pm
Forum: Support for Galaxy Gaming's Products
Topic: No Audio
Replies: 13
Views: 658

Re: No Audio

How can I check if I2S is active? Im not sure really. I just kept reflowing the solder points with the tip of my iron. I did have my system on and a game running with the sound at high volume so you know when you find your weak spot lol. Edit: I would also double check all your soldering on the sur...
by Robochris
Tue May 07, 2019 4:58 pm
Forum: Support for Galaxy Gaming's Products
Topic: No Audio
Replies: 13
Views: 658

Re: No Audio

Yes actually, late last night. Not sure which pin but I reflowed solder on the audio chip and surrounding components several times. Everything seems good to go now.
by Robochris
Mon May 06, 2019 11:55 am
Forum: Support for Galaxy Gaming's Products
Topic: No Audio
Replies: 13
Views: 658

Re: SOLVED Re: No Audio

ncdelrio wrote:
Sun May 05, 2019 2:10 pm
It was the OUTP connection on the AMP chip. I had pulled the pad accidentally. Made a new one with a single fiber of copper. Working perfectly now.
Good to know! I hope mine can be an easy fix too.
by Robochris
Sat May 04, 2019 12:47 pm
Forum: Support for Galaxy Gaming's Products
Topic: No Audio
Replies: 13
Views: 658

Re: No Audio

I’m in the same boat. No sound. But I think I have everything soldered correctly because I have a lot white noise and game music is extremely faint, even at full volume. I’ve messed with a few settings but no results yet.
by Robochris
Sat May 04, 2019 12:28 pm
Forum: Support for Galaxy Gaming's Products
Topic: (Solved)Board not booting.
Replies: 3
Views: 259

Re: (Solved)Board not booting.

Reflowed solder for the third time and that seemed to work. Odd because I had continuity on all points. But oh well, it works. Now for my audio problem.
by Robochris
Sat May 04, 2019 9:47 am
Forum: Support for Galaxy Gaming's Products
Topic: (Solved)Board not booting.
Replies: 3
Views: 259

Re: Board not booting.

KonnorJ wrote:
Sat May 04, 2019 9:35 am
Check your pololuand tp4056 are installed correctly
I’ll check again but I have reflowed and checked continuity. I’ve tried following the traces from the power pins on the Pi but but end up at the screen or audio circuit.
by Robochris
Sat May 04, 2019 9:16 am
Forum: Support for Galaxy Gaming's Products
Topic: Shutdown/Startup Weirdness
Replies: 7
Views: 380

Re: Shutdown/Startup Weirdness

Ok. I am able to boot into emulation station without any issue. However, I was only able get my board to boot by bridging two of the side contacts on the S2 spot. I originally had a momentary switch on here, but later determined that I could only get power if I was holding the switch down. Not sure...
by Robochris
Mon Apr 29, 2019 7:00 pm
Forum: Support for Galaxy Gaming's Products
Topic: (Solved)Board not booting.
Replies: 3
Views: 259

(Solved)Board not booting.

So I got all the components soldered on. I’ve followed every trace I could find. It seems like the Pi isn’t getting power. I have lights on the charger and on the small board with the switch that come on. I don’t know what to check from here. Also should I be able to detect continuity on both sides ...
by Robochris
Sat Apr 27, 2019 3:37 pm
Forum: Support for Galaxy Gaming's Products
Topic: Is there a set up script I can use?
Replies: 9
Views: 426

Re: Is there a set up script I can use?

How are you transferring roms without samba then?