Search found 36 matches

by Feynamn1
Tue Jul 24, 2018 10:30 am
Forum: General Chat (mintyPi)
Topic: Nintendo Lawsuits
Replies: 2
Views: 668

Nintendo Lawsuits

https://arstechnica.com/gaming/2018/07/nintendo-to-rom-sites-forget-cease-and-desist-now-were-suing/ So I'm sure a lot of you have heard about Nintendo coming down ROM sites like L*****, E******, L******, etc. for sharing ROMS of their games as well as Github for sharing the BIOS files for the gba. ...
by Feynamn1
Thu Jul 12, 2018 10:09 am
Forum: Support (mintyPi)
Topic: Getting screws in
Replies: 4
Views: 720

Re: Getting screws in

Well I got the two bottom screws in, but still can't get the two top screws to catch. I taped the wire down in certain places so they wouldn't catch in between the pegs, but even without the faceplate in the way it's still a pain to get the screws in. I'm worried about applying too much pressure and...
by Feynamn1
Wed Jul 11, 2018 3:17 pm
Forum: Support (mintyPi)
Topic: Getting screws in
Replies: 4
Views: 720

Getting screws in

Hi all, I've been having trouble screwing in the faceplate. I know that the pegs of the base haven't been stripped because the screws go in securely when I removed the faceplate. But somehow I can't get the screws to catch in the pegs when I put in the faceplate, and they just keep popping out. I'm ...
by Feynamn1
Tue Jun 19, 2018 8:39 pm
Forum: Support (mintyPi)
Topic: No sound
Replies: 3
Views: 659

Re: No sound

I may have figured out what's going on. I tried out a new unaltered sound card using a USB connection to the right port on the pi. Sound worked with headphones. But then I only removed the audio jack, added the right wires, and soldered onto the speaker I was using. No sound came from the speaker. L...
by Feynamn1
Thu Jun 14, 2018 12:04 pm
Forum: Support (mintyPi)
Topic: No sound
Replies: 3
Views: 659

No sound

Hi All, I've soldered the sound card to the latest mintypi PCB. When I power the board the mintypi and sudomod animations appear as they do when the sound card it successfully detected, but no sound comes from the speaker I soldered onto the other side of the PCB. Before I removed the USB plug and t...
by Feynamn1
Mon Jun 04, 2018 2:37 pm
Forum: Looking to Buy
Topic: Looking For: Mintypi v2 screen
Replies: 1
Views: 380

Looking For: Mintypi v2 screen

I somehow cracked the screen Helder sent me, which had this result, https://imgur.com/a/aEDYCfz After that I ordered a new screen. Unfortunately in the process of taking off the original LCD, I also took off eight of the pads and so the screen PCB is ruined. If anybody has a working 2.4 inch mintypi...