For OSX, if you don't have the "Sparkfun Pro Micro" board listed in Tools / Boards, then do the following: In the main menu bar, go to the "Arduino menu" and "Preferences" In the last field titled "Additional Boards Manager URLs" field, enter this url: https://raw.githubusercontent.com/sparkfun/Ardu...

Button included sounds like a really good idea. Was there a reason the Popcorn version used a latching switch? Regular tactile seems to make more sense when compared to most reset buttons like this. I used a latching switch so I could disconnect the batteries when putting away the unit for longer p...

Instead of building that monstrosity of a reset switch, can I not just using a single breadboard jumper wire and carefully close the reset pins when needed? We are only closing the ISP Reset to GND, correct? https://images.duckduckgo.com/iu/?u=http%3A%2F%2Fecx.images-amazon.com%2Fimages%2FI%2F51YldD...

Just did some mild digging on Raspberry Pi's github, and it looks like the logic from my postulated boot sequence is correct! So, if/when support for USB booting is added to the PI0, we could potentially implement USB plug n play via cartridges. Thumb Drive, Networking Devices, Soundcards, anything....

I think I've already mentioned this idea before in a long lost post, but if they eventually support USB flash drive booting on the pi0, what might be a cool implementation is if you mapped the cartridge port to a single USB port. Then you could plug n play different USB sticks inside various cartrid...

Hopefully it's only a matter of time for the PI0

You Can Boot a Raspberry Pi 3 From a Hard Drive or Over Ethernet

http://lifehacker.com/you-can-boot-a-ra ... 1784983772

Hi there, Thanks for the video. The monitor should not affect the operation of Emulation Station nor RetroArch. Firstly, what I would do is remove the power monitor and confirm that its not a problem with RetroArch being unable to close certain ROMs you might have. That way you know for sure. But I ...

I have updated my original thread and the battery monitor github readme.md and have pointed them to this thread as the new recommended hardware solution over the pololu. I will be testing this circuit and if all goes well, I'll completely abandon support of the pololu and push this as the proper met...

Just curious, has anyone here started a battery fire yet?

After cracking my screen while I was finishing up, and then now having to pull everything out just to replace the screen, I might just grab one of these all-in-ones, rather than resolder and retest everything all over again. I'll keep my eye out for when you release this batch of 25 next week. Nice ...