Hi, all, does anybody know how I might make a battery monitor solution (i.e., what hardware and software I should use) if I’m making a 2S 7.4V version of this, as outlined earlier in this thread? It uses a stepdown converter, not a Powerboost, so I can’t use the Lipopi circuit and script that Banjo...

@banjokazooie Regarding connecting the digitzer to the adafruit ar1100. What is the pin assignment of the digitzer fpc ? Does it matter which pin/wire come to x- x+ and y- and y+ ? Thank you so much Better stick to the silkscreen on the ar1100 and cross check the connection with the build in connec...

xouliox wrote: ↑

Tue Jul 31, 2018 7:08 am

Regarding teensy wiring

The 3 common grounds from the left and right flat cable are they going to the brown gnd on the teensy picture or the black gnd ?

I does not matter, GND is a common ground so it is tied together.

Awesome project, can you share battery monitoring software and automatic shutdown? Thank you very much. I am sorry, My English is not that good Here is the source code using System; using System.Collections.Generic; using System.ComponentModel; using System.Data; using System.Drawing; using System....

xouliox wrote: ↑

Sun Jun 17, 2018 1:39 am

So i cant combine ar1100 with this https://www.adafruit.com/product/334
Because of the thinner cable from the wii u digitzer... ?

No the adafruit connector will not hold the thin fpc in place unless you put something underneath.

My bezel is broken and my digitzer came without the bezel.... i have to buy a additional. @banjokazooie How did you connect the digitzer with the ar1100 ? Did you soldered the cable ? The cable from my digitzer is bit smaller. Or is the cable of the original digitzer the right size for the ar1100 ?...

Yasting wrote: ↑

Sat Jun 09, 2018 9:45 am

Hi banjokazooie and all,

First of all : nice job ! I have a question : how did you deal with this non-square panel (AT065TN14) to get a non-deformed image ? What's the trick to obtain a 1:1 ratio on RetroPi ?

You can set it through Retroarch with some black bars on sides.

With the 5.9 1080p screen and the standard digitizer there is a lot of space between display and gamepad frame so i need a wider bezel or something. Any ideas how to handle this ? 20180602_120245.jpg I have used the original bezel from wii u touch screen https://www.ebay.com/itm/Original-Nintendo-W...

Hmm i dint know Screenshot_20180526-104853_AliExpress.jpg I think i will try it. But there so many sets with this screen but different boards. And with or without touchscreen. What should I look for on the board? Would not be easier just to use a tested lcd just like this so you have perfect fit an...

Ok thanks. What do you think about this screen https://www.aliexpress.com/store/product/NEW-For-Raspberry-Pi-1280-800-N070ICG-LD1-IPS-7-inch-LCD-Screen-Display-Remote-Driver/511141_32832219049.html?spm=2114.12010612.0.0.421c4226WL0V5d Its the smallest 7" inch screen i found. Outline 161mm ×107 mm. ...