Can you please help me to list the folders i need to transfer for games and bios and Art? if you use Samba via your network on your PC/Laptop, then everything you need will be all there.... (just make sure the RPi is on the same network as your PC/Laptop) Untitled-1.jpg Untitled-2.jpg you may have ...

i used a RPI zero image i have based on "GodZi PiZero 32 GO" and wanted to add the "retrogame" +"Safe Shutdown" scripts. to my surprise after installin the Safe Shutdown scrip the Pi-zero didnt shut down as expected (i did follow the installation instructions more than once). i used a clean reropie...

Im just hoping for a tutorial on ili9341 screens I tried juj's fbcp-ili9341 but was a little confused and it didn't work, is this still the best one or is there a more up to date way? try this..... https://sudomod.com/forum/viewtopic.php?f=42&t=7389&p=70512&hilit=juj#p70512 the instructions are for...

have you enabled/turned on I2C in raspi-config.....

should be found in interfacing options....


.

the blue wire looks like it could be a Ground (GND) for the audio.....
could be wrong....

but it looks like the Green and Purple wires are for PWM audio.....


where does that orange wire go to



also some clearer photo/images would help....
just to get a overview of everything...


.

Update: I connected the display up to 12v and got this: https://drive.google.com/file/d/1M6ymahCRNklVSJTxRi3_-hDW2tlQFiff/view?usp=sharing I have confirmed the pi is working. its looks like.... (from the video) that the Raspberry Pi isn't getting enough power.... thats why its looping when booting ...

if you post some pics of what you've done....

it may help.....


also
(maybe a bit late now)
the better option would be to use a Pi3A...
as there is no need to start cutting things up... and you may only need to desolder the USB port (thats is a may)

.

I did wonder what came of this project.....






the member fdeluxe hasn't been on here for some time now....

its interesting to see how one of the prints actually come out....


GLWS



.

Only two things I'm really struggling with in this build is, which screen should I go with and I guess I should look at some form of low voltage protection.. Is there any pre made boards out there for that? As for the screen I'm thinking of going with the bw 3.5inch reversing camera screen, I was t...

Has anyone tried the deadpanrobot set ? the buttons & sets deadpan robot sell are really good quality (this does NOT include the budget buttons).... they are not like the re-pro buttons you can get on aliexpress, eBay or similar (these are the budget buttons on his site) the quality is good... the ...