Popcorn wrote:Keep us posted. Happy to adopt your modal if it works.

Will do, also can you measure what the voltage is between the EN pin and GND.

Also @Popcorn the resistance behind the transistor isn't yet calculated.

@Camble, I think I found a solution but it actually makes the pololu obselete. The solution is mechanical in the meaning of a small relay switch. I'll attach a picture of the wiring. Good thinking. I hadn't considered a relay. Yeah, but now I'm trying to find if a depletion mosfet can do the same a...

@Camble, I think I found a solution but it actually makes the pololu obselete. The solution is mechanical in the meaning of a small relay switch. I'll attach a picture of the wiring.

So, is it possible to use a double slide switch and a transistor to pull the EN pin down.

So, I want to use the code but I'm not going to use a pololu. The part that I want to use is the low battery and instead of a slide switch I want a tactile switch that gives the command to shutdown the rp0 if it's been pressed for ~2sec. That's for the rp0 shutdown, for the shutting down of the pow...

So, I want to use the code but I'm not going to use a pololu. The part that I want to use is the low battery and instead of a slide switch I want a tactile switch that gives the command to shutdown the rp0 if it's been pressed for ~2sec. That's for the rp0 shutdown, for the shutting down of the powe...

It could work but you'll need some power switches to switch what it needs to do, the micro-b connector has 5 connections where the data and power comes in/out but the id one is to see if there's an otg is connected (in the otg cable the id and ground are connected to each other). So in regular mode ...

Anyway of making one for me? Just black throughout, with the "Game Boy Zero" in the center? with the labels and stuff stil lthere Like this http://i.imgur.com/4MtZWfA.png I was wondering if anyone could make a good looking label out of this picture. Here you go http://i.imgur.com/RHWhJz3.png

Well thanks to @silvusvalentine for the vectors, now I made some too.