Help me,build Bmo

[Bmo PI]

Do you know any video that teaches the functional buttons?

[Bmo PI]

Unfortunately the Pi3 does not have SD card solder pads like the Pi0 does. Using the adapter or desoldering the original SD card socket is the only way.

continuous not understanding, like I want for a game boy cartridge slot just like Wermy did just that in RPI3! And not to put an entry Sd.PS: I am Brazilian so I do not understand much the video in English

[jb32647]

Wermy's cartridge slot has an SD card in it, which he uses to boot the RPi0 into Retropie. Do you want the same thing? A cartridge for USB? Or just a cartridge for good looks?

[Bmo PI]

cartridge for good looks

[jb32647]

cartridge for good looks

Ahh ok. In that case I would recommend you get an old gameboy game (nothing too valuable, like Zelda or Pokémon, something bad like old football games) and open it up. Remove the circuit board, and scrape off the old label. You can print your own label with glossy photo paper, which looks quite nice. Then just use some glue to secure the cartridge in place.

If you're not doing the SD cartridge, you don't have to install the cartridge reader, which saves valuable space inside.

[ICMF]

Doesn't the cartridge have to go in its butt, though?

[Bmo PI]

cartridge for good looks

Ahh ok. In that case I would recommend you get an old gameboy game (nothing too valuable, like Zelda or Pokémon, something bad like old football games) and open it up. Remove the circuit board, and scrape off the old label. You can print your own label with glossy photo paper, which looks quite nice. Then just use some glue to secure the cartridge in place.

If you're not doing the SD cartridge, you don't have to install the cartridge reader, which saves valuable space inside.

here at sudomod sells http://market.sudomod.com/micro-sd-cart ... filtering/

[Bmo PI]

Okay, the game boy cartridge I have now missing where I will solder on the card the cartridge player of gameboy?

[jb32647]

Okay, the game boy cartridge I have now missing where I will solder on the card the cartridge player of gameboy?

If you just want the cartridge for looks, you don't need the cartridge reader.

[Bmo PI]

I really wanted a functional cartridge. I saw a video that the guy used half a cartridge to look beautiful