Hey! I'm thinking about making a custom Raspberry Pi handheld unit, (The SpicyPi™) and I'm about to order parts. Would this be all I need? If not, please leave a link below to the part, preferably from Adafruit.
Sound Card: ($4.95)
https://www.adafruit.com/product/1475
Battery Charger: ($6.95)
https://www.adafruit.com/product/1904
Battery: ($9.95)
https://www.adafruit.com/product/258
Screen: ($9.95)
https://www.adafruit.com/product/618
Buttons: ($2.50)
https://www.adafruit.com/product/367
Wires: ($3.95)
https://www.adafruit.com/product/758
Raspberry Pi 0 W: ($10.00)
https://www.adafruit.com/product/3400
USB Adapter for SC: ($2.95)
https://www.adafruit.com/product/2910
Slide Switch: ($0.95)
https://www.adafruit.com/product/805
3D Printed Parts: ($0.00)
-SpicyHotSauce
PS: I don't need a speaker, a headphone jack is fine for me.
Parts list: Am I missing anything?
-
- Posts: 3
- Joined: Sun Feb 18, 2018 3:07 pm
Parts list: Am I missing anything?
Last edited by SpicyHotSauce on Wed Feb 21, 2018 5:27 am, edited 1 time in total.
-
- Posts: 3
- Joined: Sun Feb 18, 2018 3:07 pm
Who is online
Users browsing this forum: No registered users and 1 guest