Waveshare 1.3inch IPS 240x240 Display - First project.

Want to show off your own project? Want to keep a build log of it? Post it here!
Palmore
Posts: 16
Joined: Sat Sep 15, 2018 8:48 am
Has thanked: 5 times
Been thanked: 4 times

Re: Waveshare 1.3inch IPS 240x240 Display - First project.

Post by Palmore » Fri Jan 11, 2019 1:51 pm

Strider wrote:
Fri Jan 11, 2019 5:27 am
I've got a couple of these hats I bought on a whim but never got around to making a case, thanks for sharing! I'll try to find time to print off a copy, life's been crazy lately but my better 3/4 has to work tomorrow so I might actually have half a Saturday off myself.
Awesome! Be sure to share your success (or otherwise lol). I'm curious to see how well it prints out on others devices. I've only got 1 printer, and I want to make sure all the stuff fits when printed on another device. The tolerances are very slim, especially with the buttons.

User avatar
Strider
Posts: 15
Joined: Fri Feb 16, 2018 9:03 pm
Location: Elsewhere
Has thanked: 13 times
Been thanked: 1 time

Re: Waveshare 1.3inch IPS 240x240 Display - First project.

Post by Strider » Sat Jan 12, 2019 10:11 am

So this is interesting. The .stl has some strange artifacts when I try to run it through MatterControl, see attached. What software are you using to slice the file?

I'm also having some serious issues warping, but that's all on my printer. Stupid tape keeps peeling up.
Attachments
pi hat render.PNG
pi hat render.PNG (44.46 KiB) Viewed 109 times

Palmore
Posts: 16
Joined: Sat Sep 15, 2018 8:48 am
Has thanked: 5 times
Been thanked: 4 times

Re: Waveshare 1.3inch IPS 240x240 Display - First project.

Post by Palmore » Sat Jan 12, 2019 11:52 am

I've been using Cura to slice my files, the artifacts may be something left over in the Google Sketchup files.

What printer do you have? I could provide my gcode files as well, I'm using an Ender 3.

User avatar
Strider
Posts: 15
Joined: Fri Feb 16, 2018 9:03 pm
Location: Elsewhere
Has thanked: 13 times
Been thanked: 1 time

Re: Waveshare 1.3inch IPS 240x240 Display - First project.

Post by Strider » Sat Jan 12, 2019 4:48 pm

I've got a Monoprice Maker Select V2. I'll try Cura, thank you!

Palmore
Posts: 16
Joined: Sat Sep 15, 2018 8:48 am
Has thanked: 5 times
Been thanked: 4 times

Re: Waveshare 1.3inch IPS 240x240 Display - First project.

Post by Palmore » Sun Jan 13, 2019 12:12 pm

I'm not sure my slicer settings in my gcode would work for you then =( Let me know if you get a chance to try Cura, I'm curious why those artifacts are showing up, I'm still new to all of this =(

Palmore
Posts: 16
Joined: Sat Sep 15, 2018 8:48 am
Has thanked: 5 times
Been thanked: 4 times

Re: Waveshare 1.3inch IPS 240x240 Display - First project.

Post by Palmore » Sun Jan 13, 2019 5:30 pm

I finally got it all put back together today and running. Sadly the audio isn't working, I think due to me moving the speaker wire itself abit much and it broke.

I've got a video of it up and running here, I'm still working out some design flaws in the case before I upload the full case design.


Palmore
Posts: 16
Joined: Sat Sep 15, 2018 8:48 am
Has thanked: 5 times
Been thanked: 4 times

Re: Waveshare 1.3inch IPS 240x240 Display - First project.

Post by Palmore » Fri Jan 18, 2019 12:18 pm

Strider wrote:
Sat Jan 12, 2019 4:48 pm
I've got a Monoprice Maker Select V2. I'll try Cura, thank you!
I've updated the STL files on Thingiverse, running them through a 3D print prep tool before saving them.
Can you let me know if you see the same artifacts from the new files?

I've also been working more on the lower layers and should have them up on Thingiverse within a weeks time.

Image

Image

Image

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests