WII U RASPBERRY PI 3 FINISHED

Want to show off your own project? Want to keep a build log of it? Post it here!
Guinan
Posts: 11
Joined: Thu Apr 13, 2017 12:48 pm
Has thanked: 1 time

Re: WII U RASPBERRY PI 3 FINISHED

Post by Guinan » Wed May 03, 2017 1:29 pm

banjokazooie wrote:
Wed May 03, 2017 11:14 am
The tp4056 can charge any mAh battery but charging time depends of the capacity . If you going to use those batteries in series you must use 1S protection as the output voltage is 4.2V. 4S protection is for 4 cell in series with output voltage 16.8V and you cannot use Tp4056 for charging.

For the mic question on the usb dac there is a dedicated audio jack for mic when you use something like this http://www.ebay.co.uk/itm/USB-External- ... SwWxNYtIO3. The one I have used has only audio out.
Hey thanks! That answered my questions. I've bought that DAC. Thanks for the input.

nicky1664
Posts: 3
Joined: Thu May 04, 2017 2:24 pm

Re: WII U RASPBERRY PI 3 FINISHED

Post by nicky1664 » Thu May 04, 2017 2:35 pm

Hi banjokazooie! Amazing Project ! I'm checking everything if I can do this my self. I have two questions actually.
1/ Why one your diagram you don't have any connection between the LCD Driver an the Raspberry Pi? You have the connection with the hdmi port.

2/ Why you have one strange metal stuff on the USB of Teensy 2.0?

Thanks and again great job!

cvp
Posts: 20
Joined: Wed Aug 31, 2016 12:11 pm

Re: WII U RASPBERRY PI 3 FINISHED

Post by cvp » Fri May 05, 2017 10:36 am

banjokazooie wrote:
Sun Apr 30, 2017 2:31 pm
Don't use TP4056 in this configuration. If you want higher charging current use something like this http://www.ebay.co.uk/itm/172591594393? ... EBIDX%3AIT

Remember to put battery protection on unprotected cells and then connect them to charging circuit and rpi
I have overlooked something serious.
But the combination with TP4056 (including protection circuit) AND adafruit Powerboost 1000 (no C!) Would suffice?

User avatar
banjokazooie
Posts: 211
Joined: Thu May 19, 2016 1:14 pm
Location: https://t.me/pump_upp
Been thanked: 171 times
Contact:

Re: WII U RASPBERRY PI 3 FINISHED

Post by banjokazooie » Fri May 05, 2017 12:20 pm

cvp wrote:
Fri May 05, 2017 10:36 am
banjokazooie wrote:
Sun Apr 30, 2017 2:31 pm
Don't use TP4056 in this configuration. If you want higher charging current use something like this http://www.ebay.co.uk/itm/172591594393? ... EBIDX%3AIT

Remember to put battery protection on unprotected cells and then connect them to charging circuit and rpi
I have overlooked something serious.
But the combination with TP4056 (including protection circuit) AND adafruit Powerboost 1000 (no C!) Would suffice?
Would suffice for what?.

cvp
Posts: 20
Joined: Wed Aug 31, 2016 12:11 pm

Re: WII U RASPBERRY PI 3 FINISHED

Post by cvp » Fri May 05, 2017 12:32 pm

banjokazooie wrote:
Fri May 05, 2017 12:20 pm
Would suffice for what?.
I mean to replace the separate Lipo Charger + Protector Board with this constellation. Will it work to recharge the batteries while playing?

User avatar
banjokazooie
Posts: 211
Joined: Thu May 19, 2016 1:14 pm
Location: https://t.me/pump_upp
Been thanked: 171 times
Contact:

Re: WII U RASPBERRY PI 3 FINISHED

Post by banjokazooie » Fri May 05, 2017 2:29 pm

cvp wrote:
Fri May 05, 2017 12:32 pm
banjokazooie wrote:
Fri May 05, 2017 12:20 pm
Would suffice for what?.
I mean to replace the separate Lipo Charger + Protector Board with this constellation. Will it work to recharge the batteries while playing?
It will work same as in my setup. Will recharge battery but at only at 1A rate.

Racerboy
Posts: 129
Joined: Thu Jun 02, 2016 4:49 pm
Has thanked: 25 times
Been thanked: 36 times

Re: WII U RASPBERRY PI 3 FINISHED

Post by Racerboy » Sat May 06, 2017 8:06 pm

So is there anything you wish you had done different? How's the battery life on it? Speakers have good quality sound?

MagicTurtle
Posts: 2
Joined: Thu May 11, 2017 8:25 am

Re: WII U RASPBERRY PI 3 FINISHED

Post by MagicTurtle » Thu May 11, 2017 9:56 am

Rad

User avatar
banjokazooie
Posts: 211
Joined: Thu May 19, 2016 1:14 pm
Location: https://t.me/pump_upp
Been thanked: 171 times
Contact:

Re: WII U RASPBERRY PI 3 FINISHED

Post by banjokazooie » Sun May 14, 2017 10:45 am

Racerboy wrote:
Sat May 06, 2017 8:06 pm
So is there anything you wish you had done different? How's the battery life on it? Speakers have good quality sound?
I would change the 1S lipo and powerboost combination to 2S lipo and pololu step down converter. This will provide slightly better battery life and not inducing a lot of noise in power lines. Speakers are OK considering the size.

reke
Posts: 26
Joined: Mon May 01, 2017 11:52 pm
Has thanked: 2 times
Been thanked: 1 time

Re: WII U RASPBERRY PI 3 FINISHED

Post by reke » Tue May 16, 2017 12:39 am

hi there, im new here, sorry for my bad english, im from mexico, and i want to build a gamepad for a gift, i have some questions and i would if somebody could helping me, can i use de original gamepad lcd?, the analog joystick with teensy works fine?

thanx :)

i have a gamepad but i dont use anymore

Post Reply

Who is online

Users browsing this forum: Google [Bot] and 1 guest