sudomod

That lcd is touchscreen? Nice project!

I almost completed my project too, I also used a core M3.

I'm having trouble finding a double coil to eliminate the noise from the audio amplifier that fits in the chassis of the Nintendo switch. Any suggestions?

Use shielding fabric tape and wrap all the audio wires with it to create a shield around them... Also, twist audio wire together before wrapping them with the shield

WoW! nice trick, I will try It tomorrow.

This is my audio wiring. Banjo has used a coil in the power supply of the amplifier, but the Nintendo switch chasis is so tiny.

Thanks Yaya! Your trick works fine, and now the sound is clear.

Awesome ! Glad that it helped

Hi banjo! If it's possible could you tell me the voltage that the teensy module reads? Are you using two 2.2k Ohm like a resistor divider to read 3.7?

pais83 wrote: ↑

Mon Dec 17, 2018 5:06 am

Hi banjo! If it's possible could you tell me the voltage that the teensy module reads? Are you using two 2.2k Ohm like a resistor divider to read 3.7?

For 1S lipo you dont need voltage divider as teensy analog input is rated as 5V, for 2S 7.4V a 2.2KOhm divider is fine.

Thanks master. I'm waiting the teensy to finish my build

banjokazooie wrote: ↑

Mon Dec 17, 2018 5:02 pm

Just a question. You used a 7inch screen aren't you losing some picture as the gamepad originally came with a 6.2inch screen? Wouldn't the shell cover some of the screen?

I'm gonna do this build but with an android stick instead of windows.