Page 14 of 20

Re: WII U Intel m5 Console

Posted: Wed Jan 23, 2019 2:21 am
by VeteranGamer
Mayday wrote:
Tue Jan 22, 2019 4:51 pm
banjokazooie wrote:
Mon Dec 17, 2018 5:02 pm
Just a question. You used a 7inch screen aren't you losing some picture as the gamepad originally came with a 6.2inch screen? Wouldn't the shell cover some of the screen?

I'm gonna do this build but with an android stick instead of windows.

the screen used in this build is a 6" screen.....

https://www.alibaba.com/product-detail/ ... 05218.html


your not going to be able to fit a 7" screen into the Wii U Game Pad....

https://sudomod.com/forum/viewtopic.php ... =90#p61780


however....
its not impossible to have a build with a 7" screen....
this member managed to pull it off (and it looks pretty decent)

https://sudomod.com/forum/viewtopic.php?f=13&t=1720





Good Luck with your build....
NB: it might be a good idea to start your own post.....



.

Re: WII U Intel m5 Console

Posted: Wed Jan 23, 2019 4:39 am
by Mayday
Oh ok my bad.

How much are people paying for that display? It says $55 - $100

Re: WII U Intel m5 Console

Posted: Wed Jan 23, 2019 5:22 am
by VeteranGamer
Mayday wrote:
Wed Jan 23, 2019 4:39 am
Oh ok my bad.

How much are people paying for that display? It says $55 - $100
you have to contact the sellers.....

that figure of $55-100 is a bit misleading.....
these are really wholesale figures (more than 1 unit purchases)....

expect to pay around $100 or even more
(its a really decent display)



.

Re: WII U Intel m5 Console

Posted: Wed Jan 23, 2019 1:25 pm
by Mayday
Ok this doesn't make any sense to me I was talking to the seller about this display.

https://rover.ebay.com/rover/0/0/0?mpre ... 3756252550

He says it wont work. He says he plugged in a settop box and it didn't work. I think it might be used error

Re: WII U Intel m5 Console

Posted: Wed Jan 23, 2019 2:15 pm
by banjokazooie
Mayday wrote:
Wed Jan 23, 2019 1:25 pm
Ok this doesn't make any sense to me I was talking to the seller about this display.

https://rover.ebay.com/rover/0/0/0?mpre ... 3756252550

He says it wont work. He says he plugged in a settop box and it didn't work. I think it might be used error
The lcd you listed works fine with intel compute stick as I have used the same in this build. Hovever there is cheaper alternative
https://www.aliexpress.com/item/5-9-inc ... 4c4dzwBz6l

It is only 1080p but half the price, works fine with compute stick but not with raspberry pi.

Re: WII U Intel m5 Console

Posted: Wed Jan 23, 2019 2:52 pm
by Mayday
Would it work with an android stick?

Re: WII U Intel m5 Console

Posted: Thu Jan 24, 2019 5:15 am
by pais83
Mayday wrote:
Wed Jan 23, 2019 2:52 pm
Would it work with an android stick?
I used the one that banjo recommend to you as the cheap option in my project. It's a nice screen, the only thing you have to do it's rotate the screen because it's 1920p instead of 1080p

Re: WII U Intel m5 Console

Posted: Wed Jan 30, 2019 4:28 am
by pais83
I'm sorry for bothering you again Banjokazooie, but if it's possible I would like to ask you another question.
When you read the status of the power led of the compute stick, do you do It to turn off the power when you turn off the computer from Windows? Do you send a Signal from teensy to the off of the pololu bigpush?

Re: WII U Intel m5 Console

Posted: Wed Jan 30, 2019 4:39 pm
by banjokazooie
pais83 wrote:
Wed Jan 30, 2019 4:28 am
I'm sorry for bothering you again Banjokazooie, but if it's possible I would like to ask you another question.
When you read the status of the power led of the compute stick, do you do It to turn off the power when you turn off the computer from Windows? Do you send a Signal from teensy to the off of the pololu bigpush?
No I havent had time to incorporate ant test that fuction. It was there just to indicate the state of the compute stick but it is easy to make this work with just piece of code. At the end I have opted for mechanical way of cutting power from the battery just in case.

Re: WII U Intel m5 Console

Posted: Thu Jan 31, 2019 3:09 am
by pais83
Thanks for all master! I'm totally neophyte with coding and I was trying to understand how you had done it. I'm finishing my project and I only have to do the battery monitoring and automatic shutdown, but I'm having trouble compiling your c# code...