sudomod

How did you go from the joysticks to the teensy? Did you solder in a new connection or did you make use of the existing white wire connector for the original hardware?

tyon2006 wrote: ↑

Thu Jun 06, 2019 12:22 pm

How did you go from the joysticks to the teensy? Did you solder in a new connection or did you make use of the existing white wire connector for the original hardware?

In this project I made a custom pcb to hold the teensy 2++ and fpc connectors for the joysticks and buttons.

banjokazooie wrote: ↑

Fri Jun 07, 2019 1:59 am

tyon2006 wrote: ↑

Thu Jun 06, 2019 12:22 pm

How did you go from the joysticks to the teensy? Did you solder in a new connection or did you make use of the existing white wire connector for the original hardware?

In this project I made a custom pcb to hold the teensy 2++ and fpc connectors for the joysticks and buttons.

This is what I'm referring to: How did you interface with that?

tyon2006 wrote: ↑

Fri Jun 07, 2019 7:42 am

banjokazooie wrote: ↑

Fri Jun 07, 2019 1:59 am

tyon2006 wrote: ↑

Thu Jun 06, 2019 12:22 pm

How did you go from the joysticks to the teensy? Did you solder in a new connection or did you make use of the existing white wire connector for the original hardware?

In this project I made a custom pcb to hold the teensy 2++ and fpc connectors for the joysticks and buttons.

This is what I'm referring to:
WiiUJoystickConnector.png

How did you interface with that?

Removed completely to save space .

Thanks for the previous responses Can you tell me how you got the home/power pcb printed? Did you use a specific service? Would you be willing to share your design file, if available?

tyon2006 wrote: ↑

Thu Jun 13, 2019 7:42 pm

Thanks for the previous responses Can you tell me how you got the home/power pcb printed? Did you use a specific service? Would you be willing to share your design file, if available?

The pcb is so simple I have done it at home with the yellow paper transfer method for laser printer.

Hello... I've been working on a project and I am finally ready to buy a screen... I've been trying to get one from alibaba... everytime I hit order some company responds to my request trying to sell me something different. How do you actually get the lcd that's actually listed?

https://www.alibaba.com/product-detail/ ... 05218.html

Has anyone had any success?

AntFJ wrote: ↑

Wed Oct 23, 2019 10:49 pm

Hello... I've been working on a project and I am finally ready to buy a screen... I've been trying to get one from alibaba... everytime I hit order some company responds to my request trying to sell me something different. How do you actually get the lcd that's actually listed?

https://www.alibaba.com/product-detail/ ... 05218.html

Has anyone had any success?

That lcd is expensive around 120£, use cheap alternative with full hdmi port easy to modify for FPC

https://www.aliexpress.com/item/3298908 ... b201603_55

I just can't be happy with the active area on these smaller displays...

Original screen active display area: 78mm x 138mm
5.98 screen you used: 74.5mm x 132.5mm
The cheaper 5.9 screen: 72.9mm x 129.6mm

Id really like to find a bigger screen that is 1080p but I think we are out of luck. Maybe im being silly... ill try the 5.9 inch and see how it looks

Edit - found this one
US $36.20 16%OFF | 6 inch 2560*1440 2K LCD Screen Display HDMI Module Kit for 3D Printer VR Virtual Reality DLP SLA PC Monitor UV Curing Projector
https://s.click.aliexpress.com/e/pk6WuOJW

74.52mm x 132.48mm so 1.75mm gap on the top and bottom and 2.75mm gap on the left and right. I think this will look good especially because i plan on using a glass screen protector and those are typically smaller than the screen anyway

US $69.79 | 6.3 inch 2560x1440 FOG IPS Screen No Backlight HDMI to MIPI Control Board PC Monitor 3D Printer Light Cure DIY Projector Display
https://s.click.aliexpress.com/e/Ki0lnuwk

Last one... this screen is the perfect size but no backlight....