thanks man, i am going to try it today from which part of france are you living? i am actually living in compiegneSidSilver wrote:try to copy past all of this codeotaola.franc wrote:Prety sure, i made it with the guide photos so it woyld work. Maybe i missed something but i dont think so... Maybe i erased to much in the config? I erase everything that had HDMI in the line... I cant imagine Another thing.... U.uSidSilver wrote:Are you sure your screen is wired correctly ?Don't forget to modify "/recalbox/share/system/recalbox.conf to set "global.videomode=default"Code: Select all
disable_overscan=0 sdtv_mode=2 hdmi_group=1 hdmi_mode=16 # Overclock gpu_mem_256=128 gpu_mem_512=256 gpu_mem_1024=512 #hdmi_force_hotplug=1 temp_limit=65 kernel=zImage disable_overscan=0 overscan_scale=1 arm_freq=1000 core_freq=250 sdram_freq=450 force_turbo=0 over_voltage=6 over_voltage_sdram=0 gpu_freq=250
if it doesn't work, then check your wires.
Yellow should go to square TV pin on the PI
White, I removed it but be careful, some screens need it to be grounded.
Recalbox not working with screen
-
- Posts: 50
- Joined: Wed May 11, 2016 8:20 am
- Has thanked: 14 times
- Been thanked: 7 times
Re: Recalbox not working with screen
-
- Posts: 263
- Joined: Sun May 22, 2016 6:22 am
- Location: France
- Has thanked: 137 times
- Been thanked: 37 times
-
- Posts: 50
- Joined: Wed May 11, 2016 8:20 am
- Has thanked: 14 times
- Been thanked: 7 times
Re: Recalbox not working with screen
is there anydifference by chance if it s a pi3?SidSilver wrote:try to copy past all of this codeotaola.franc wrote:Prety sure, i made it with the guide photos so it woyld work. Maybe i missed something but i dont think so... Maybe i erased to much in the config? I erase everything that had HDMI in the line... I cant imagine Another thing.... U.uSidSilver wrote:Are you sure your screen is wired correctly ?Don't forget to modify "/recalbox/share/system/recalbox.conf to set "global.videomode=default"Code: Select all
disable_overscan=0 sdtv_mode=2 hdmi_group=1 hdmi_mode=16 # Overclock gpu_mem_256=128 gpu_mem_512=256 gpu_mem_1024=512 #hdmi_force_hotplug=1 temp_limit=65 kernel=zImage disable_overscan=0 overscan_scale=1 arm_freq=1000 core_freq=250 sdram_freq=450 force_turbo=0 over_voltage=6 over_voltage_sdram=0 gpu_freq=250
if it doesn't work, then check your wires.
Yellow should go to square TV pin on the PI
White, I removed it but be careful, some screens need it to be grounded.
- fernandinho1337
- Posts: 37
- Joined: Sat Nov 12, 2016 2:07 pm
- Location: Germany
- Has thanked: 13 times
- Been thanked: 5 times
Re: Recalbox not working with screen
can i access the relevant config file via windows/ web browser interface or do i need to go into linux and change there?
best regards, toni
best regards, toni
Who is "Jessie" and why does he like pi(e)?
-
- Posts: 50
- Joined: Wed May 11, 2016 8:20 am
- Has thanked: 14 times
- Been thanked: 7 times
Re: Recalbox not working with screen
hello sid, i have some questions.SidSilver wrote:try to copy past all of this codeotaola.franc wrote:Prety sure, i made it with the guide photos so it woyld work. Maybe i missed something but i dont think so... Maybe i erased to much in the config? I erase everything that had HDMI in the line... I cant imagine Another thing.... U.uSidSilver wrote:Are you sure your screen is wired correctly ?Don't forget to modify "/recalbox/share/system/recalbox.conf to set "global.videomode=default"Code: Select all
disable_overscan=0 sdtv_mode=2 hdmi_group=1 hdmi_mode=16 # Overclock gpu_mem_256=128 gpu_mem_512=256 gpu_mem_1024=512 #hdmi_force_hotplug=1 temp_limit=65 kernel=zImage disable_overscan=0 overscan_scale=1 arm_freq=1000 core_freq=250 sdram_freq=450 force_turbo=0 over_voltage=6 over_voltage_sdram=0 gpu_freq=250
if it doesn't work, then check your wires.
Yellow should go to square TV pin on the PI
White, I removed it but be careful, some screens need it to be grounded.
first i erase EVERYTHING in the config and i write ONLY the code that you put here?.(this part i only can do from the boot of the pi, no?)
another thing, how i modify the /recalbox/share/.... ? (this part i need to acces the files from the sd card connected to the computer?)
thanks.
-
- Posts: 263
- Joined: Sun May 22, 2016 6:22 am
- Location: France
- Has thanked: 137 times
- Been thanked: 37 times
Re: Recalbox not working with screen
Yes you keep a copy of your current settings and then erase everything from the file and paste the new code.otaola.franc wrote:hello sid, i have some questions.SidSilver wrote:try to copy past all of this codeotaola.franc wrote: Prety sure, i made it with the guide photos so it woyld work. Maybe i missed something but i dont think so... Maybe i erased to much in the config? I erase everything that had HDMI in the line... I cant imagine Another thing.... U.uDon't forget to modify "/recalbox/share/system/recalbox.conf to set "global.videomode=default"Code: Select all
disable_overscan=0 sdtv_mode=2 hdmi_group=1 hdmi_mode=16 # Overclock gpu_mem_256=128 gpu_mem_512=256 gpu_mem_1024=512 #hdmi_force_hotplug=1 temp_limit=65 kernel=zImage disable_overscan=0 overscan_scale=1 arm_freq=1000 core_freq=250 sdram_freq=450 force_turbo=0 over_voltage=6 over_voltage_sdram=0 gpu_freq=250
if it doesn't work, then check your wires.
Yellow should go to square TV pin on the PI
White, I removed it but be careful, some screens need it to be grounded.
first i erase EVERYTHING in the config and i write ONLY the code that you put here?.(this part i only can do from the boot of the pi, no?)
another thing, how i modify the /recalbox/share/.... ? (this part i need to acces the files from the sd card connected to the computer?)
thanks.
You access your files by Putty or WinSCP
Re: Recalbox not working with screen
Maybe you have problems with HDMI?
I have a problems with connection of my Playstation and TV. I just wanted to play some games but my TV doesn't see it
Who is online
Users browsing this forum: No registered users and 1 guest