Recalbox not working with screen

[otaola.franc]

Are you sure your screen is wired correctly ?

Prety sure, i made it with the guide photos so it woyld work. Maybe i missed something but i dont think so... Maybe i erased to much in the config? I erase everything that had HDMI in the line... I cant imagine Another thing.... U.u

try to copy past all of this code

Code: Select all

disable_overscan=0

sdtv_mode=2
hdmi_group=1
hdmi_mode=16

# Overclock
gpu_mem_256=128
gpu_mem_512=256
gpu_mem_1024=512

#hdmi_force_hotplug=1
temp_limit=65

kernel=zImage

disable_overscan=0
overscan_scale=1
arm_freq=1000
core_freq=250
sdram_freq=450
force_turbo=0
over_voltage=6
over_voltage_sdram=0
gpu_freq=250

Don't forget to modify "/recalbox/share/system/recalbox.conf to set "global.videomode=default"

if it doesn't work, then check your wires.
Yellow should go to square TV pin on the PI
White, I removed it but be careful, some screens need it to be grounded.

thanks man, i am going to try it today from which part of france are you living? i am actually living in compiegne

[SidSilver]

Not far, i'm near Cergy

[otaola.franc]

Are you sure your screen is wired correctly ?

Prety sure, i made it with the guide photos so it woyld work. Maybe i missed something but i dont think so... Maybe i erased to much in the config? I erase everything that had HDMI in the line... I cant imagine Another thing.... U.u

try to copy past all of this code

Code: Select all

disable_overscan=0

sdtv_mode=2
hdmi_group=1
hdmi_mode=16

# Overclock
gpu_mem_256=128
gpu_mem_512=256
gpu_mem_1024=512

#hdmi_force_hotplug=1
temp_limit=65

kernel=zImage

disable_overscan=0
overscan_scale=1
arm_freq=1000
core_freq=250
sdram_freq=450
force_turbo=0
over_voltage=6
over_voltage_sdram=0
gpu_freq=250

Don't forget to modify "/recalbox/share/system/recalbox.conf to set "global.videomode=default"

if it doesn't work, then check your wires.
Yellow should go to square TV pin on the PI
White, I removed it but be careful, some screens need it to be grounded.

is there anydifference by chance if it s a pi3?

[fernandinho1337]

can i access the relevant config file via windows/ web browser interface or do i need to go into linux and change there?

best regards, toni

[otaola.franc]

Are you sure your screen is wired correctly ?

Prety sure, i made it with the guide photos so it woyld work. Maybe i missed something but i dont think so... Maybe i erased to much in the config? I erase everything that had HDMI in the line... I cant imagine Another thing.... U.u

try to copy past all of this code

Code: Select all

disable_overscan=0

sdtv_mode=2
hdmi_group=1
hdmi_mode=16

# Overclock
gpu_mem_256=128
gpu_mem_512=256
gpu_mem_1024=512

#hdmi_force_hotplug=1
temp_limit=65

kernel=zImage

disable_overscan=0
overscan_scale=1
arm_freq=1000
core_freq=250
sdram_freq=450
force_turbo=0
over_voltage=6
over_voltage_sdram=0
gpu_freq=250

Don't forget to modify "/recalbox/share/system/recalbox.conf to set "global.videomode=default"

if it doesn't work, then check your wires.
Yellow should go to square TV pin on the PI
White, I removed it but be careful, some screens need it to be grounded.

hello sid, i have some questions.
first i erase EVERYTHING in the config and i write ONLY the code that you put here?.(this part i only can do from the boot of the pi, no?)
another thing, how i modify the /recalbox/share/.... ? (this part i need to acces the files from the sd card connected to the computer?)
thanks.

[SidSilver]

Prety sure, i made it with the guide photos so it woyld work. Maybe i missed something but i dont think so... Maybe i erased to much in the config? I erase everything that had HDMI in the line... I cant imagine Another thing.... U.u

try to copy past all of this code

Code: Select all

disable_overscan=0

sdtv_mode=2
hdmi_group=1
hdmi_mode=16

# Overclock
gpu_mem_256=128
gpu_mem_512=256
gpu_mem_1024=512

#hdmi_force_hotplug=1
temp_limit=65

kernel=zImage

disable_overscan=0
overscan_scale=1
arm_freq=1000
core_freq=250
sdram_freq=450
force_turbo=0
over_voltage=6
over_voltage_sdram=0
gpu_freq=250

Don't forget to modify "/recalbox/share/system/recalbox.conf to set "global.videomode=default"

if it doesn't work, then check your wires.
Yellow should go to square TV pin on the PI
White, I removed it but be careful, some screens need it to be grounded.

hello sid, i have some questions.
first i erase EVERYTHING in the config and i write ONLY the code that you put here?.(this part i only can do from the boot of the pi, no?)
another thing, how i modify the /recalbox/share/.... ? (this part i need to acces the files from the sd card connected to the computer?)
thanks.

Yes you keep a copy of your current settings and then erase everything from the file and paste the new code.
You access your files by Putty or WinSCP

[primpon]

Maybe you have problems with HDMI?