cfiedler wrote: ↑Fri Feb 02, 2018 4:11 pm
This has been a helpful guide, but I do have one question. I'm wondering if you could provide an example LCD screen that this method would work with. For instance, this display (
https://www.adafruit.com/product/1680) which uses a ribbon connector?
Hi there, glad I could be of help.
The display you mentioned is a TTL display, which would need software to make it run.
This is no plug&play display. There are a lot of tutorials on such displays, I recall.
You could stop by in the discord channel and ask for a nudge in the right direction of a guide,
but I, unfortunately, have no experience with TTL displays.
You can always use one of those to go with this guide:
https://www.ebay.com/itm/5-Wireless-TFT ... Swc2FaJj77
The question is, can this be run on 5v, which is a trial and error thing. Also, those usually only have 320x240 or 640x480 if you are lucky.
There is this one on aliexpress, thoug:
https://www.aliexpress.com/item/5-inch- ... 78988.html
Mind the driver board, depending on your space available.